39 lines
1.5 KiB
Markdown
39 lines
1.5 KiB
Markdown
# Connecting to Gadgetbridge
|
|
|
|
Launch Gadgetbridge and tap on the **"+"** button on the bottom right to add a new device:
|
|
|
|
|
|
|
|
Wait for the scan to complete, your PineTime should be detected:
|
|
|
|
|
|
|
|
Tap on it. Gadgdetbridge will pair and connect to your device:
|
|
|
|
|
|
|
|
# Updating with Gadgetbridge
|
|
|
|
## Preparation
|
|
|
|
All releases of InfiniTime are available on the [release page of the GitHub repo](https://github.com/InfiniTimeOrg/InfiniTime/releases).
|
|
|
|
Release files are available under the *Assets* button.
|
|
|
|
You need to download the DFU of the firmware version that you'd like to install, for example `pinetime-mcuboot-app-dfu-1.6.0.zip`
|
|
|
|
## Gadgetbridge
|
|
|
|
Now that Gadgetbridge is connected to your PineTime, use a file browser application (I'm using Seafile to browse my NAS) and browse to the DFU file (image-xxx.zip) you downloaded previously. Tap on it and open it using the Gadgetbridge application/firmware installer:
|
|
|
|
|
|
|
|
Read carefully the warning and tap **Install**:
|
|
|
|
|
|
|
|
Wait for the transfer to finish. Your PineTime should reset and reboot with the new version of InfiniTime!
|
|
|
|
Don't forget to **validate** your firmware. In the InfiniTime go to the settings (swipe right, select gear icon) and Firmware option and click **validate**. Otherwise after reboot the previous firmware will be used.
|
|
|
|
|