mobi/seedvault
1
0
Fork 0
Code Pull requests Activity
seedvault/doc/README.md
Torsten Grote 75797f93e7
add readme for app dedup research
2024-10-08 19:36:02 -03:00

541 lines
25 KiB
Markdown
Raw Blame History

# Seedvault App Backup Repository Documentation
This document is a technical description of how Seedvault backs up apps
installed on an Android device.
It is inspired by the design of the [Restic backup program](https://restic.net/).
Portions of this document are blatant copies of
[its documentation](https://restic.readthedocs.io/en/latest/100_references.html).
However, due to the different nature of Android backups,
the design [was heavily simplified](#differences-to-restic).
Note that the backup of files is described [in a different document](../storage/doc/design.md).
## Terminology
This section introduces terminology used in this document.
*Repository*: All data produced during a backup is sent to and stored in a repository
in a structured form.
*Chunk*: Larger files are cut into re-usable chunks that are the unit of de-duplication.
*Blob*: A blob is a chunk stored compressed and encrypted as an individual file in the repository.
*Snapshot*: A snapshot stands for the state of a collection of apps
that have been backed up at some point in time.
The state here means the app data as delivered by the system (may be incomplete or absent)
and the apps themselves as device specific APK files as installed at time of backup.
It is compressed and encrypted as an individual file in the repository.
*Storage ID*: A storage ID is the SHA-256 hash of the content stored in the repository.
This ID is required in order to load the file from the repository,
because it is represented in the stored file name.
## Repository
All data is stored in a repository.
Repositories consist of several directories and files to store blobs and snapshots.
All files in a repository are encrypted, only written once and never modified afterwards.
### Repository Context
Historically, all data that Seedvault saves to external storage
is below a `.SeedVaultAndroidBackup` directory.
It can contain one or more repositories as users may use the same storage location
for several devices or user accounts.
As having to choose and remember a specific folder is considered bad UX
for the regular Android user,
Seedvault creates a repository for the user.
### Repository ID
The folder name is the ID of the repository.
It is the result of applying HMAC-SHA256 with the string "app backup repoId key"
(see [cryptography](#cryptography)) to the
[`ANDROID_ID`](https://developer.android.com/reference/android/provider/Settings.Secure#ANDROID_ID)
which is a 64-bit number (expressed as a hexadecimal string) provided by the operating system.
It is unique to each combination of app-signing key, user, and device.
This design should guarantee that only one single app ever backs up to or prunes the repository.
Also, if the user generates a new recovery key and thus all keys change,
Seedvault will not attempt to back up into the repository tied to the old key.
For restore, we iterate through all repositories and only offer snapshots for restore
that can be decrypted with the key provided by the user.
Hence, a restore may run on a second device while the first device is doing a backup.
Note: A repository used for file backup is stored in a folder of the format `[ANDROID_ID].sv`
and thus completely separate.
### Repository Layout
The name of all files in the repository starts with the lower case hexadecimal representation
of the storage ID, which is the SHA-256 hash of the file's contents.
This allows for easy verification of files for accidental modifications,
like disk read errors, by simply running the program `sha256sum` on the file
and comparing its output to the file name.
Blobs are stored in a directory named after the first two characters of their name.
Snapshots are stored in the repository root and have a `.snapshot` extension.
Example of a repository with two snapshots and several blobs:
```console
.SeedVaultAndroidBackup
└── f35860ee961789fb5f92f467455acf165120a319e9dc27044282982111546f26
├── 00
│ └── 001b527ebb5eb57f4934bafeb998cb08595ed7ced603d9d25bd3c50b338f939d
├── 01
│ └── 01e61554a023c9c1053e026c8a70498fb4732c3ecaaad1bd44003185b493529b
├── ...
├── fe
│ └── fe94fd20382e76d0215a743f3f27879d9555947250504de5b0d45321f1f66c7a
├── ff
│ └── ff2e9f9c75d211602c5a68f0471aa549e2499a3fa9496255b26678f4aad75a98
├── 22a5af1bdc6e616f8a29579458c49627e01b32210d09adb288d1ecda7c5711ec.snapshot
├── 3ec79977ef0cf5de7b08cd12b874cd0f62bbaf7f07f3497a5b1bbcc8cb39b1ce.snapshot
```
## Data Format
All files stored in the repository start with a version byte
followed by an encrypted and authenticated payload (see also [Cryptography](#cryptography)).
The version (currently `0x02`) is used to be able to modify aspects of the design in the future
and to provide backwards compatibility.
Blob payloads include the raw bytes of the compressed chunks
and snapshot payloads their compressed protobuf encoding.
Compression is using the [zstd](http://www.zstd.net/) algorithm in its default configuration.
```console
┏━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━┓
┃ Version ┃ encrypted tink payload ┃
┃ 0x02 ┃ (with 40 bytes header) ┃
┗━━━━━━━━━┻━━━━━━━━━━━━━━━━━━━━━━━━┛
```
The structure of the encrypted tink payload is explored further
in [Stream Encryption](#stream-encryption).
## Snapshots
Snapshots include information about the state of a collection of apps
that have been backed up at some point in time.
It is encoded [in protobuf format](../app/src/main/proto/snapshot.proto), compressed with zstd
and encrypted.
Example printed as JSON:
```json
{
"version": 2,
"token": 171993168400,
"name": "Google Pixel 7a",
"androidId": "bbcc5909347d0b83",
"sdkInt": 34,
"androidIncremental": "eng.user.20240618.130805",
"d2d": true,
"apps": {
"org.example.app": {
"time": 171993268400,
"state": "apkAndData",
"type": "full",
"name": "Example app",
"system": false,
"launchableSystemApp": false,
"chunkIds": [
"001b527ebb5eb57f4934bafeb998cb08595ed7ced603d9d25bd3c50b338f939d",
"ff2e9f9c75d211602c5a68f0471aa549e2499a3fa9496255b26678f4aad75a98"
],
"apk": {
"versionCode": 2342,
"installer": "org.fdroid.basic",
"signatures": [
"abd81091c552574506bbb143e3bd856504382666dd495811a539188957522ab2"
],
"splits": [
{
"name": "base",
"size": 1337,
"chunkIds": [
"4f34352be7c1f4d1597d27f5824b42bad2222cf029cc888e9d7318d5e8bc2ad5",
"16759b52e8ef8c3b080f0a8cdb8ac21474cb41070f272a02e28fd1163762336b"
]
}
]
}
}
},
"iconChunkIds": [
"c11c3cf1c326375b177e768de908e6e423c3d8866715c8ec7159156b6ea82497"
],
"blobs": {
"001b527ebb5eb57f4934bafeb998cb08595ed7ced603d9d25bd3c50b338f939d": {
"id": "259bb78b72b7b7f7ac1a9613c3c4936b06342471b39b1c41a328acaa2d3ccca5",
"length": 645312,
"uncompressedLength": 695312
},
"ff2e9f9c75d211602c5a68f0471aa549e2499a3fa9496255b26678f4aad75a98": {
"id": "5e6a8789571183a97e84f74fe13c4e95b6c5645e2d53fe5cc7aa122897c246b4",
"length": 9455314,
"uncompressedLength": 9855314
},
"4f34352be7c1f4d1597d27f5824b42bad2222cf029cc888e9d7318d5e8bc2ad5": {
"id": "a79d2b9e7afa051782cff6424ede1337c8ce05c34d9c2e565e2ed47e7ae80ea4",
"length": 8430346,
"uncompressedLength": 9430346
},
"16759b52e8ef8c3b080f0a8cdb8ac21474cb41070f272a02e28fd1163762336b": {
"id": "31aa8e88c8b73df565fd8bbcadfe7e2e79303eb5c0223253353d3003273e3140",
"length": 26549052,
"uncompressedLength": 28549052
},
"c11c3cf1c326375b177e768de908e6e423c3d8866715c8ec7159156b6ea82497": {
"id": "5421895dbead0ba83f0993f17b5f72f6c6618c0e9ea849c6c53ac240d1802d0b",
"length": 523496,
"uncompressedLength": 645314
}
}
}
```
The `chunkIds` and `iconChunkIds` fields contain an ordered list with plain text SHA-256 hashes
which can be found in the main `blobs` dictionary.
This contains a mapping from plain text SHA-256 hashes to storage IDs and size information.
The decrypted and uncompressed chunks concatenated in order result in the original plaintext data.
The `iconChunkIds` field assemble to a ZIP file where each entry is a
WebP encoded image, one icon for each app in the backup.
The entry name is the package name of the app.
At the beginning of most operations, we download all available snapshots
to get information about all blobs that should be available in the repository.
We may additionally retrieve a list of all blobs directly from the repository
to ensure they are actually (still) present.
Snapshot file names start with the SHA-256 hash of their content and use a `.snapshot` extension.
## Cryptography
This section is based on and thus very similar to encryption of
[files backup](../storage/doc/design.md).
### Main Key
Seedvault already uses [BIP39](https://github.com/bitcoin/bips/blob/master/bip-0039.mediawiki)
to give users a mnemonic recovery code and for generating deterministic keys.
The derived key has 512 bits
and Seedvault previously used the first 256 bits as an AES key to encrypt app data.
Unfortunately, this key's usage is limited by Android's keystore to encryption and decryption.
Therefore, the second 256 bits get imported into Android's keystore for use with `HMAC-SHA256`,
so that this key can act as a main key that we can deterministically derive additional keys from
by using HKDF ([RFC5869](https://tools.ietf.org/html/rfc5869)).
These second 256 bits *must not* be used for any other purpose in the future.
We use them for a main key to avoid users having to handle yet another secret.
For deriving keys, we are only using the HKDF's second 'expand' step,
because the Android Keystore does not give us access
to the key's byte representation (required for first 'extract' step) after importing it.
This should be fine as the input key material is already a cryptographically strong key
(see section 3.3 of RFC 5869 above).
### Key derivation overview
The original entropy comes from a BIP39 seed (12 words = 128 bit size)
obtained from Java's `SecureRandom`.
A PBKDF SHA512 based derivation defined in BIP39 turns this into a 512 bit seed key
as described above.
The derived seed key (512 bit size) gets split into two parts:
1. legacy app data encryption key (unused, was for `0x00`) - 256 bit - first half of seed key
2. main key - 256 bit - second half of seed key used to derive application specific keys:
1. App Backup: HKDF with info "app backup repoId key"
2. App Backup: HKDF with info "app backup gear table key"
3. App Backup: HKDF with info "app backup stream key"
4. Legacy App Backup: HKDF with info "app data key" (only used for restoring `0x01` backups)
5. File Backup: HKDF with info "stream key"
6. File Backup: HKDF with info "Chunk ID calculation"
### Stream Encryption
When a stream is written to the repository,
it starts with a header consisting of a single byte indicating the backup format version
(currently `0x02`) followed by the encrypted payload.
All data written to the repository will be encrypted with a fresh key
to prevent issues with nonce/IV re-use of a single key.
We derive a stream key from the main key
by using HKDF's expand step with the UTF-8 byte representation of the string "app backup stream key"
as info input.
This stream key is then used to derive a new key for each stream.
Instead of encrypting, authenticating and segmenting a cleartext stream ourselves,
we have chosen to employ the [tink library](https://github.com/tink-crypto/tink-java) for that task.
Since it does not allow us to work with imported or derived keys
and its recommended
[high-level API](https://developers.google.com/tink/encrypt-large-files-or-data-streams)
requires this,
we are directly using its
[AesGcmHkdfStreaming](https://developers.google.com/tink/streaming-aead/aes_gcm_hkdf_streaming)
primitive to delegate encryption and decryption of byte streams.
This follows the OAE2 definition as proposed in the paper
"Online Authenticated-Encryption and its Nonce-Reuse Misuse-Resistance"
([PDF](https://eprint.iacr.org/2015/189.pdf)).
It adds its own 40 byte header consisting of header length (1 byte), salt (32 bytes)
and nonce prefix.
Then it adds one or more segments, each up to 1 MB in size.
All segments are encrypted with a fresh key that is derived by using HKDF
on our stream key, the salt and associated data as info
([documentation](https://github.com/google/tink/blob/v1.5.0/docs/WIRE-FORMAT.md#streaming-encryption)).
Note that the tink documentation (currently) recommends 128 bit keys,
while we use 256 bit keys.
Otherwise, we stick to the recommended defaults.
All types of files written to the repository have the following format:
```console
┏━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓
┃ version ┃ tink payload (with 40 bytes header) ┃
┃ byte ┃ ┏━━━━━━━━━━━━━━━┳━━━━━━┳━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━┓ ┃
┃ ┃ ┃ header length ┃ salt ┃ nonce prefix ┃ encrypted segments ┃ ┃
┃ (0x02) ┃ ┗━━━━━━━━━━━━━━━┻━━━━━━┻━━━━━━━━━━━━━━┻━━━━━━━━━━━━━━━━━━━━┛ ┃
┗━━━━━━━━━┻━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛
```
When writing to the repository,
the authenticated associated data (AAD) of each file contains the backup version as the only byte
(to prevent downgrade attacks) to ensure it is also authenticated.
Other data is not included as renaming and swapping out files is made impossible
by their file name starting with the content hash (which must be checked when reading).
## Content-defined chunking
We use FastCDC ([PDF](https://www.usenix.org/system/files/conference/atc16/atc16-paper-xia.pdf))
to split ZIP files and TAR streams we receive from the system into re-usable chunks.
We aim for an average chunk size of 3 MiB,
because in our tests it presented a good trade-off
between deduplication ratio and number of small chunks.
Data smaller than 1.5 MiB will not be chunked further and be left as a single chunk.
The FastCDC algorithm uses a gear table containing 256 random integers with 31 bits.
When this table changes, the resulting chunks will be different.
Hence, every repository always uses the same gear table.
However, to make watermarking attacks harder,
we use the "app backup gear table key" that gets derived from our main key
to deterministically compute a gear table using AES CTR to cipher 32 null bytes with a null IV.
If an attacker is somehow able to reverse engineer the gear table *and* the derived key,
they know how we chunk larger files, but they should be unable to retrieve our main key.
Since a random gear table computed like this may not be sufficient for attackers
able to control (part of the) plaintext, e.g. sending a file in a messaging app,
and due to the presence of lots of data consisting of only a single chunk,
we apply additional random padding to all chunks.
The plaintext gets padded with random bytes after compression and before encryption.
**TODO** determine the details of the padding.
## Operations
### Backup
* download all snapshots to get a mapping of all plaintext hashes (chunk IDs) to storage IDs
* optionally: get a list of all blobs and their storage IDs to confirm they (still) exist
* if APK backup wasn't disabled, for each app:
* get version code and check if we already have an APK with that version code in a snapshot
* if APK was backed up already, re-use list of plaintext hashes for current snapshot
* if APK was not yet backed up, put it (and its splits) through the chunker
* chunks already in the repository are not uploaded again, only their hash recorded
* new chunks get compressed, encrypted and hashed to determine their storage ID, then uploaded
* for each app (the system allows us to back up):
* app data we receive as a tar stream from the system gets chunked
* chunks already in the repository are not uploaded again, only their hash recorded
* new chunks get compressed, encrypted and hashed to determine their storage ID,
then uploaded
* remember ordered list of chunk IDs for the app (and its APKs)
* add all apps, their chunk IDs (and related metadata) to new snapshot and upload that
* at the end, delete old snapshots based on retention rules, then do [pruning](#pruning).
### Resume interrupted backup
* the mapping from chunk ID to storage ID is only stored in snapshots
* if backup gets interrupted (e.g. power or network outage), no snapshot gets written
* due to encryption, storage IDs are not deterministic,
i.e. the same chunk stored two times will have two different storage IDs
* therefore, we keep a local cache for the mapping of chunk ID to storage ID
* before starting a backup, we retrieve all uploaded storage IDs
and remove all IDs from our local cache that don't exist
* when processing new chunks, we check if the chunk ID exists in our local cache
and re-use the existing blob from the mapped storage ID
* all mappings will be added to snapshot that gets uploaded at the end of backup
### Restore
* download all snapshots and let the user choose one for restore
* for all apps that were selected for restore:
* reinstall app from APKs assembled from fetched chunks (see below for details)
* look up chunk IDs for app from snapshot
* download blobs for the chunk IDs as specified in snapshot
* give decrypted and decompressed chunk data back to system
Repository re-use:
* if restore happened on a new device, offer user to tie repository to new device
* the same main key is being used on new device due to entry of BIP39 recovery code
* the repository ID depends on the main key and the `ANDROID_ID`
which is different on the new device
* to tie repository to new device, the repository folder will be renamed to the repository ID
specific to the new device
* this will prevent the old device from doing further writes into the repository
and ensure the device will be exclusively writing to the repository
### Pruning
* download all snapshots
* assemble list of blobs still referenced by existing snapshots
* delete all blobs that are not referenced anymore
### Repository data verification
There are two types of checks that can be performed:
* Structural consistency and integrity, e.g. snapshots and blobs
* download all snapshots and a list of all blobs and their size
* check that all blobs referenced in snapshots exist on storage and have expected size
* Integrity of the actual data that you backed up
* do the structural checking as above
* offer full checking and random sampling as options as full check will be slow
* also download all/some blobs check their hash, decrypt and check chunk ID
## Read and Write Ordering
New snapshots only get added after all blobs they reference have been uploaded.
Blobs only get deleted after all snapshots that reference them have been deleted first.
## Threat Model
It is a design goal to be able to securely store backups
in a location that is not completely trusted
(e.g. a shared system where others can potentially access the files).
### General assumptions
* The device a backup is created on is trusted.
This is the most basic requirement, and it is essential for creating trustworthy backups.
* The user does not share the recovery code with an attacker.
* There is no protection against attackers deleting files at the storage location.
Nothing can be done about this.
If this needs to be guaranteed, get a secure location without any access from third parties,
e.g. a flash drive.
* Advances in cryptography attacks against the cryptographic primitives used
(i.e. AES-GCM-256 and SHA-256) have not occurred.
Such advances could render the confidentiality or integrity protections useless.
* Sufficient advances in computing have not occurred to make brute-force attacks
against cryptographic protections feasible.
### Guarantees
* Unencrypted content of stored files and metadata (other than size and creation time of files)
cannot be accessed without the recovery code for the repository.
Everything is encrypted and authenticated.
* Modifications to data stored in the repository (due to bad RAM, broken hard-disk, etc.)
can be detected.
* Data that has been tampered with will not be decrypted.
### Possible attacks
With the aforementioned assumptions and guarantees in mind,
the following are examples of things an attacker could achieve in various circumstances.
An adversary with read access to your backup storage location could:
* Attempt a brute force recovery code guessing attack against a copy of the repository.
* Infer the size of backups by using creation timestamps of repository files.
* Make guesses if a user is using a specific app
by comparing the size of newly appearing files in the repository
with the (split) APKs of that app and its update cycle.
Applied padding and key-based chunking may reduce attacker's confidence in guesses.
An adversary with network access could:
* Attempt to DoS the server storing the backup repository
or the network connection between client and server.
* Determine from where you create your backups (i.e. the location where the requests originate).
* Determine where you store your backups (i.e. which provider/target system).
* If the backend uses an encrypted connection,
infer the size of backups by observing network traffic.
If no encrypted connection is used, everything an attacker with read access (above) can do.
### Attacks if assumptions are violated
The following are examples of the implications associated
with violating some of the aforementioned assumptions.
An adversary who compromises (via malware, physical access, etc.) the device making backups could:
* Render the entire backup process untrustworthy
(e.g., intercept recovery code, copy files, manipulate data).
* Recover the encryption key from memory, thus decrypt backups from past and future.
* Create snapshots (containing garbage data) and eventually remove all correct snapshots.
An adversary with write access to your files at the storage location could:
* Delete or manipulate your backups,
thereby impairing your ability to restore from the compromised storage location.
## Differences to restic
Even though the design was initially inspired by restic,
the specific nature of Android app backups allowed us to make many simplifications
that result in the following differences:
* no config file needed:
* repository ID is in the folder name
* version is in first byte of all files
* chunker differentiator is based on key
* no keys files
* we re-use the existing BIP39 recovery code whose derived key is stored in the device key store
* blobs are not being combined into pack files, but saved directly
* tests with real-world Android backups have shown 11% of files smaller than 10 KiB
and 39% of files smaller than 500 KiB
* a typical backup has around 500 files, so the number of small files seemed manageable enough
to not justify the increased complexity of pack files and indexes
* no indexes
* since we have no pack files, we don't need an index for blobs in pack files
* a mapping of chunk ID to storage ID of blobs is stored in the snapshot
* no tree blobs
* Android app backups are flat and not in a tree structure, just a list of apps and a list of
APKs
(one APK can have several APK splits)
* metadata needed for each app is directly stored in the snapshot which still has manageable
size
* no locks
* we only allow a single app to use a repository by binding it to the app/user/device
* restore while another app is backing up is possible, but this doesn't require locks,
if we follow the proper read/write ordering
* different encryption and MACs
* we were already employing AES GCM via Google's tink library
for legacy app backup and files backup, so we stuck with it
* snapshot metadata is Android specific and snapshots are not stored in a dedicated folder,
but have a `.snapshot` extension. So their name isn't the content hash, but starts with it.
## Acknowledgements
The following individuals have reviewed this document and provided helpful feedback.
* Aayush Gupta
* Michael Rogers
* Thomas Waldmann
* Tommy Webb
* Alexander Weiss
* Opal Wright
As they have reviewed different parts and different versions at different times,
this acknowledgement should not be mistaken for their endorsement of the current design
nor the final implementation.
View git blame Copy permalink