When we verify an HTTP signature,
* If we know the key, check in the DB whether we know the actor lists it. If it
doesn't, and there's room left for keys, HTTP GET the actor and update the DB
accordingly.
* If we know the key but had to update it, do the same, check usage in DB and
update DB if needed
* If we don't know the key, record usage in DB
However,
* If we're GETing a key and discovering it's a shared key, we GET the actor to
verify it lists the key. When we don't know the key at all yet, that's fine
(can be further optimized but it's marginal), but if it's a key we do know,
it means we already know the actor and for now it's enough for us to rely
only on the DB to test usage.
Previously, when verifying an HTTP signature and we fetched the key and
discovered it's shared, we'd fetch the actor and make sure it lists the key URI
in the `publicKey` field. But if we already knew the key, had it cached in our
DB, we wouldn't check the actor at all, despite not knowing whether it lists
the key.
With this patch, we now always GET the actor when the key is shared,
determining the actor URI from the `ActivityPub-Actor` request header, and we
verify that the actor lists the key URI. We do that regardless of whether or
not we have the key in the DB, although these two cases and handled in
different parts of the code right now (for a new key, it's in Web.ActivityPub
fetchKey; for a known key, it's in Vervis.Foundation httpVerifySig).
Previously, when verifying an HTTP signature and we find out we have the
provided keyid in the DB, and this key is a personal key, we would just grab
the key owner from the DB and ignore the ActivityPub-Actor header.
This patch adds a check: If we find the key in the DB and it's a personal key,
do grab the owner from that DB row, but also check the actor header: If it's
provided, it has to be identical to the key owner ID URI.
If the key we fetched is a shared key, the only way to determine the actor to
which the signature applies is to read the HTTP header ActivityPub-Actor. But
if it's a personal key, we can detect the actor by checking the key's owner
field. Still, if that actor header is provided, we now compare it to the key
owner and make sure they're identical.
When fetching a key that is embedded in the actor document, we were already
comparing the actor ID with the actor header, so that part didn't require
changes.
When a local user wants to publish an activity, we were always GETing the
recipient actor, so that we could determine their inbox and POST the activity
to it. But now, instead, whenever we GET an actor (whether it's for the key sig
verification or for determining inbox URI), we keep their inbox URI in the
database, and we don't need to GET it again next time.
Using a dedicated type allows to record in the type the guarantees that we
provide, such as scheme being HTTPS and authority being present. Allows to
replace ugly `fromJust` and such with direct field access.
Before, there was a single key used as a personal key for all actors. Now,
things work like this:
- There are 2 keys, each time one is rotated, this way the old key remains
valid and we can freely rotate without a risk of race conditions on other
servers and end up with our posts being rejected
- The keys are explicitly instance-scope keys, all actors refer to them
- We add the ActivityPub-Actor header to all activity POSTs we send, to declare
for which specific actor our signature applies. Activities and otherwise
different payloads may have varying ways to specify attribution; using this
header will be a standard uniform way to specify the actor, regardless of
payload format. Of course, servers should make sure the actual activity is
attributed to the same actor we specified in the header. (This is important
with instance-scope keys; for personal keys it's not critical)
Allow keys to specify expiration time using w3c security vocabulary. If a key
has expired, we treat it like sig validation failure and re-fetch the key from
the other server. And we never accept a sig, even a valid sig, if the key has
expired.
Since servers keep actors and keys in the DB, expiration can be a nice way to
ask that keys aren't used more than we want them to. The security vocab spec
also recommends to set expiration time on keys, so it's nice to support this
feature.
It's now possible for activities we be attributed to actors that have more than
one key. We allow up to 2 keys. We also store in the DB. Scaling to support any
number of keys is trivial, but I'm limiting to 2 to avoid potential trouble and
because 2 is the actual number we need.
By having 2 keys, and replacing only one of them in each rotation, we avoid
race conditions. With 1 key, the following can happen:
1. We send an activity to another server
2. We rotate our key
3. The server reaches the activity in its processing queue, tries to verify our
request signature, but fails because it can't fetch the key. It's the old
key and we discarded it already, replaced it with the new one
When we use 2 keys, the previous key remains available and other servers have
time to finish processing our requests signed with that key. We can safely
rotate, without worrying about whether the user sent anything right before the
rotation time.
Caveat: With this feature, we allow OTHER servers to rotate freely. It's safe
because it's optional, but it's just Vervis right now. Once Vervis itself
starts using 2 keys, it will be able to rotate freely without race condition
risk, but probably Mastodon etc. won't accept its signatures because of the use
of 2 keys and because they're server-scope keys.
Maybe I can get these features adopted by the fediverse?
Shared key means the key is used for multiple actors. I'm not sure explicitly
specifying this will be necessary, but I prefer to have it in place to help
with debugging in case something unexpected comes from other servers, or my
format overlaps with stuff used in other software and encodes a different
meaning.
Each public key can specify whether it's shared or personal, and this patch
checks for that when verifying a request signature. It rejects shared keys,
accepting valid sigs only from personal keys.
Very soon I'll add shared key support.
* Repo collab now supports basic default roles developer/user/guest like
project collab does
* User/Anon collab for repos and projects are now stored as fields instead of
in dedicated tables, there was never a need for dedicated tables but I didn't
see that before
* Repo push op is now part of `ProjectOperation`
* `RepoRole` and related code has been entirely removed, only project roles
remain and they're used for both repos and projects
* This is the first not-totally-trivial DB migration in Vervis, it's automatic
but please be careful and report errors
* When adding collaborators, you don't need a custom role. If you don't choose
one, a basic default "developer" role will be used
* If you don't assign a `ProjectCollabUser` role, a default "user" role is
assumed for logged in users, otherwise a "guest" role
* The "guest" role currently has no access at all
* Theoretically there may also be a "maintainer" role allowing project
sharers/maintainers to give maintainer-level access to more people, but right
now maintainer role would be the same as developer so I haven't added it yet
It already had one, but it didn't have a public key and it was using the old
mess of the Vervis.ActivityStreams module, which I'll possibly remove soon.
It's hopefully more elegant now.
This patch includes some ugliness and commented out code. Sorry for that. I'll
clean it up soon.
Basically there's a TVar holding a Vector of at most 10 AP activities. You can
freely POST stuff to /inbox, and then GET /inbox and see what you posted, or an
error description saying why your activity was rejected.
The actor key will be used for all actors on the server. It's held in a `TVar`
so that it can always be safely updated and safely retrieved (technically there
is a single writer so IORef and MVar could work, but they require extra care
while TVar is by design suited for this sort of thing).
In Haskell by default if a thread has an exception, the main thread isn't
notified at all. This patch changes service thread launching to re-throw their
exceptions in the main thread, so that their failure is noticed.
I suppose there's no performance difference in using one, but it requires
`http-conduit` as a build dependency, so potentially we may be reducing build
time by removing unnecessary deps.
Git pull uses a POST request, which is treated as a write request and the CSRF
token is checked. However, no modification to the server is made by git pulls,
as far as I know (actually I'm not sure why it uses a POST). The entire
response is handled by the git command, and the client side is usually the git
command running in the terminal, there's no session and no cookies (as far as I
know). So I'm just disabling CSRF token checking for this route.
The sharer and repo were being taken and used as is to check push permissions,
which is how it's supposed to be, *but* they were also being used as is to
build the repo path! So sharer and repo names that aren't all lowercase were
getting "No such repository" errors when trying to push.
I changed `RepoSpec` to hold `ShrIdent` and `RpIdent` instead of plain `Text`,
to avoid confusions like that and be clear and explicit about the
representation, and failures to find a repo after verifying it against the DB
are now logged as errors to help with debugging.
I hope this fixes the problem.
We have gained:
* Haskell-side validation of schema changes before their execution
* Report of results of migration process
* Handling of old deployments
However:
* The validation code hasn't been tested yet at all
* Most of the migration list hasn't been applied at all yet
* Adding lists of entities from a model file is NOT VALIDATED!!! It's totally
possible to implement, just need to catch all the small details right
Until now the list of DB migration actions was incomplete, containing only
changes made since I added the migration system itself. It now contains the
2016-08-04 model, and then every change made since then.
IMPORTANT: The 2016-08-04 instance doesn't have a schema version entity at all,
so it is assigned version 0, while the actual version of its schema is 1. I'm
going to patch persistent-migration to allow it to be 1, making the migration
path smooth.
A workflow is a new entity in Vervis. It defines the workflow of a
projects' ticket system. That includes the possible ticket states,
custom ticket fields, various filters and so on. All ticket system
customization is currently planned to be managed using workflows.
Currently workflows are private and per sharer, but the plan is to
support public workflows that can be shared and cloned.
If `darcs init` isn't given a `--repodir`, even if you do specify the
new repository's path, it complains that it can't run inside a
repository, because it's running from a darcs clone of Vervis itself. If
the repo dir is specified using `--repodir` instead, Darcs doesn't
complain.
That's at least the situation with 2.8.5, didn't check other versions.
At least in PostgreSQL, at most one reference is allowed. My undirected
recursion code used a UNION of two recursive steps, one for each
direction. That is invalid, so instead I define a CTE that's a union of
the edges and their reverse, and do a single recursion step on that CTE
instead of on the edge table itself.
I thought SQL arrays were common and PersistList corresponded to SQL
array values. But that isn't the case. PersistList seems to be
serialized as a JSON list, and `filterClause` uses IN, not ANY. So I'm
doing the same thing here and using IN.
Note that I'm building the list myself using Text concatenation, not
using `filterClause`, because the latter takes a filter on an existing
`PersistEntity` while my filters often apply to temporary tables.
My implementation in Haskell does work, but ref discovery also includes
capabilities. Since I'm going to use the git binary for the next steps,
I need the git binary to specify here which capabilities it supports.
The transitive reduction query works by removing all the edges which
aren't the only paths between their nodes, i.e. longer paths exist. The
first step is to pick all the paths which include 2 or more edges.
The initial code did that appending in-edges to all paths, which results
with unnecessary duplicates and an INNER JOIN. Now, instead, just pick
all the paths with length of more than 3 nodes. This is hopefully not
just simpler, but also faster.
I used this chance to make some name changes, add some utils, tweak some
imports, remove more `setTitle`s and so on. I also made person, repo,
key and project creation forms verify CI-uniqueness.
I decided to add some safety to routes:
- Use dedicated newtypes
- Use CI for the CI-unique DB fields
Since such a change requires so many changes in many source files, this
is also a chance to do other such breaking changes. I'm recording the
change gradually. It won't build until I finish, so for now don't waste
time trying to build the app.
Darcs does export most of its module tree, but there's a problem: Darcs
relies on the current directory. It changes the current directory of the
process to the repo, and then proceeds using paths relative to the repo
dir. This is bad for my case here. If some other thread uses a relative
path (e.g. currently any repo path is relative by default) in parallel,
it will fail.
For now, the quick path around this problem is to use the `darcs`
program.
At the beginning the rendering was invalid because it parsed the entire
content as a single line. For some reason, when I read the ticket
description from the DB, all newlines are returned as CRLF. I don't know
why yet or whether it can or should be changed, but as a quick fix, I
made the handler function filter out the CRs from the text. Then the
rendering is correct.
This matches the documentation of Pandoc, which mentions the readers
assume newlines are encoded as LF.
HTML forms support only GET and POST methods. One way to bypass that is
to send the form using JS. But I don't want that. Another is to send a
POST with a hidden form field which specifies the read method. This is
what 'postTicketR' does.
This is a lot of code, better save now than sorry later when something
gets deleted by mistake.
Either way, the code will move later - once tested and organized
properly - into its own package.
