d535b8b16c
Currently the backlight is permanently on at its lowest level. The backlight is so dim that this is almost impossible to detect. I only found it when lying in a field in total darkness and observing that the screen wasn't quite as black as I expected. Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
144 lines
3.7 KiB
Python
144 lines
3.7 KiB
Python
# SPDX-License-Identifier: LGPL-3.0-or-later
|
|
# Copyright (C) 2020 Daniel Thompson
|
|
|
|
def nop():
|
|
pass
|
|
schedule = nop
|
|
def _callback(obj):
|
|
schedule()
|
|
|
|
# Start measuring time (and feeding the watchdog) before *anything* else
|
|
from machine import RTCounter
|
|
from drivers.nrf_rtc import RTC
|
|
rtc = RTC(RTCounter(1, mode=RTCounter.PERIODIC, period=1, callback=_callback))
|
|
rtc.counter.start()
|
|
|
|
import os
|
|
import time
|
|
|
|
import draw565
|
|
|
|
from machine import I2C
|
|
from machine import Pin
|
|
#from machine import Signal
|
|
from machine import SPI
|
|
|
|
from drivers.battery import Battery
|
|
from drivers.bma421 import BMA421
|
|
from drivers.touch import TouchButton
|
|
from drivers.hrs3300 import HRS3300
|
|
from drivers.signal import Signal
|
|
from drivers.st7789 import ST7789_SPI
|
|
from drivers.vibrator import Vibrator
|
|
from flash.flash_spi import FLASH
|
|
|
|
from ubluepy import uart_connected as connected
|
|
|
|
class Backlight(object):
|
|
lo = Pin("BL_LO", Pin.OUT, value=0)
|
|
mid = Pin("BL_MID", Pin.OUT, value=1)
|
|
hi = Pin("BL_HI", Pin.OUT, value=1)
|
|
|
|
def __init__(self, level=1):
|
|
self.set(level)
|
|
|
|
def set(self, level):
|
|
"""K9 backlight is very weak so we avoid lo in its own because it is
|
|
pointless.
|
|
"""
|
|
hi = 1
|
|
mid = 1
|
|
lo = 0
|
|
|
|
if level >= 3:
|
|
hi = 0
|
|
mid = 0
|
|
elif level == 2:
|
|
hi = 0
|
|
elif level == 1:
|
|
mid = 0
|
|
else:
|
|
lo = 1
|
|
|
|
self.hi(hi)
|
|
self.mid(mid)
|
|
self.lo(lo)
|
|
|
|
# Setup the display (and manage the backlight)
|
|
backlight = Backlight(0)
|
|
spi = SPI(0)
|
|
spi.init(polarity=1, phase=1, baudrate=8000000)
|
|
display = ST7789_SPI(240, 240, spi,
|
|
cs=Pin("DISP_CS", Pin.OUT),
|
|
dc=Pin("DISP_DC", Pin.OUT),
|
|
res=Pin("DISP_RST", Pin.OUT))
|
|
drawable = draw565.Draw565(display)
|
|
|
|
def boot_msg(s):
|
|
drawable.string(s, 0, 108, width=240)
|
|
if safe_mode:
|
|
time.sleep_ms(500)
|
|
|
|
safe_mode = True
|
|
boot_msg("Init button")
|
|
button = Pin('BUTTON', Pin.IN)
|
|
safe_mode = button.value()
|
|
if safe_mode:
|
|
backlight.set(2)
|
|
time.sleep(1)
|
|
|
|
try:
|
|
# Setup the last few bits and pieces
|
|
boot_msg("Init battery")
|
|
battery = Battery(
|
|
Pin('BATTERY', Pin.IN),
|
|
Signal(Pin('CHARGING', Pin.IN), invert=True),
|
|
Signal(Pin('USB_PWR', Pin.IN), invert=True))
|
|
boot_msg("Init I2C")
|
|
i2c = I2C(1, scl='I2C_SCL', sda='I2C_SDA')
|
|
boot_msg("Init BMA421")
|
|
accel = BMA421(i2c)
|
|
boot_msg("Init HRS3300")
|
|
hrs = HRS3300(i2c)
|
|
boot_msg("Init touch")
|
|
touch = TouchButton(Pin('TP_INT', Pin.IN),
|
|
Pin('TP_RST', Pin.OUT, value=0), _callback)
|
|
boot_msg("Init motor")
|
|
vibrator = Vibrator(Pin('MOTOR', Pin.OUT, value=0), active_low=True)
|
|
|
|
# Release flash from deep power-down
|
|
boot_msg("Wake SPINOR")
|
|
nor_cs = Pin('NOR_CS', Pin.OUT, value=1)
|
|
nor_cs(0)
|
|
spi.write('\xAB')
|
|
nor_cs(1)
|
|
|
|
# Mount the filesystem
|
|
boot_msg("Init SPINOR")
|
|
flash = FLASH(spi, (nor_cs,))
|
|
try:
|
|
boot_msg("Mount FS")
|
|
os.mount(flash, '/flash')
|
|
except AttributeError:
|
|
# Format the filesystem (and provide a default version of main.py)
|
|
boot_msg("Format FS")
|
|
os.VfsLfs2.mkfs(flash)
|
|
boot_msg("Retry mount FS")
|
|
os.mount(flash,'/flash')
|
|
boot_msg("Write main.py")
|
|
with open('/flash/main.py', 'w') as f:
|
|
f.write('''\
|
|
#include('main.py')
|
|
''')
|
|
|
|
# Only change directory if the button is not pressed (this will
|
|
# allow us access to fix any problems with main.py)!
|
|
if not safe_mode:
|
|
boot_msg("Enter /flash")
|
|
os.chdir('/flash')
|
|
boot_msg("Run main.py")
|
|
else:
|
|
boot_msg("Safe mode")
|
|
except:
|
|
drawable.string("FAILED", 0, 136, width=240)
|
|
backlight.set(2)
|