The 2-bit RLE encoding, in addition to supporting colour is also fully
ROMable meaning we can save 32 bytes of RAM per image by switching to
2-bit encoding.
Switch everything in icons and font.clock over to 2-bit encoding.
Note: this requires all the clock PNG files to be reencoded (because
they were originally in 1-bit grayscale format and this is no
longer supported by the encoder).
This reduces RAM overhead by 480 bytes and has only a negligable effect
on FLASH usage (+4 bytes).
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the battery icon is overlarge compared to other status bar
icons such as the BT and notification icons (both of which are 32px
high). Fix this by redrawing the battery artwork and updating
the widgets in the status bar.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Update the icon so it more closely resembles the in-game visual style
(and also so it compresses better) and update the screenshot since the
old one is the wrong size (FullHD instead of 358x406) and doesn't render
correctly in the documentation.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Make the ticks and hands larger and shorten the hands slightly to avoid
visual glitches during "undraw".
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Polar coordinates are very convenient for implementing anything with
radial lines (such as a traditional watch face).
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently all lines are a single pixel wide. To draw wider lines we
must draw two parallel lines with a single pixel offset and this is
a *very* inefficient approach, espeically on ST7789 where we spend
longer setting the clipping window than we do drawing each pixel.
Fix this by constructing a line using a variable sized square rather than
a single pixel. This will "overdraw" (some pixels will be drawn more than
once) but since square blocks can be efficiently transferred to the
display the overdraw is acceptable.
Note: It is a difficult decision whether to maintain the convention that
color is the last argument or to keep compatibility with existing
line drawing tests. This patch opts for the former and fixes up
all uses within the existing codebase.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently there are default argument values for the start and end
coordinates but the defaults don't really make any sense since there
is no reason to prefer the value 0 over any other. Remove them.
Similarly color currently defaults to 0xffff which isn't right. It
should default to the foreground colour.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently `make check` doesn't test any not-default applications.
Fix this by automatically discovering constructors and ensure that the
application can be started and stopped without generating an exception.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Add the battery frame to the theme so it matches the frame used for
charging and rename accordingly.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
This theming engine uses a bytestring (but supports anything indexable,
as long as the index results are a byte long),
stored as `wasp.system._theme`.
It has a default value, which should not change anything about the way this looks currently.
The theme can be set via `wasp.system.set_theme`,
but this should *ONLY* be used in `main.py`.
`wasp.system.set_theme` will return True if it was successful,
or False if the theme is of an old format.
Using an old format theme will *not* crash the watch,
but will use the default theme instead.
To theme this, one has to use tools/themer.py (use flag -h for complete explanation)
to generate a bytestring that's added in main.py (see diff).
The bytestring is then loaded into 'wasp.system._theme'.
Theme values can be looked up by apps by using `wasp.system.theme("theme-key")`.
Theme keys appear in the function body of `wasp.system.theme()`.
I've took the liberty of converting existing apps to use this method,
and it seems to work well.
A test theme is provided in `tools/test_theme.py`
Signed-off-by: kozova1 <mug66kk@gmail.com>
This is the API:
drawable.line(x1, y1, x2, y2, color)
The function has optimizations for the case of vertical or horizontal lines.
Signed-off-by: Kozova1 <mug66kk@gmail.com>
[daniel@redfelineninja.org.uk: Minor update to commit message]
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
This makes the simulator look nicer when it starts up... but it
doesn't help the simulator.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently we can act on the controls but we cannot "see" the display
in the test suite. That leads us to a slightly odd form of "grey box"
testing. It's functionally black box testing but some of the asserts
have to reach inside the components instead of looking at the display.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the tests do little more than fire up the simulator and
switch into (and out of) the built in applications. However this is
useful and allows us to fully integrate as a CI job.
Unfortunately the numpy warning from pysdl2 mean we have been forced
to disable all warnings to prevent pytest from collecting and reporting
them.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Signed-off-by: Carlos Gil Gonzalez <carlosgilglez@gmail.com>
[daniel@redfelineninja.org.uk: Fixed board support for simulator and
sphinx (a.k.a. doc builder)]
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Signed-off-by: Johannes Wache <jbwa@posteo.de>
[daniel@redfelineninja.org.uk: Removed some couple of unwanted merge artifacts]
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Like the other library applications this is enabled in the simulator and
included in the flash image but is disabled by default to conserve RAM
(and to give time to new apps to mature and receive improvements).
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the widgets react to touch when the alarm is ringing (and they
are invisible. For now we fix this by disabling the alarm on a touch
event. Maybe the app should reject touch events since they could acidentally
dismiss the alarm... but we already disable the alarm if we get a swipe
event so this doesn't make things much worse than they already are!
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
The long term plan is to retire and remove the 1-bit RLE code from wasp-os
so we don't want new icons using that encoding.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the swipe handling added for the confirmation view has a number
of prolems: it does not work at all for multi-screen notifications, it
interferes with the haptic feedback if we keep swiping down and an up
swipe incorrectly dismisses whole notification app.
Fix these.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the confirmation view remains active when we switch away from
the notification view. Ensure we dismiss when we background the
application.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently there are detailed hit boxes in the confirmation view widget
but any inaccurate hit is treated as No anyway by the notification app.
Additionally selecting 'No' dismisses the whole notification app rather
than just the confirmation view.
Fix the event handling so that we ignore touches outside the hit box and
only dismiss the whole notification app if we actually clear the
notifications.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
When the buttons are pressed then the widget should be dismissed. There
is no reason to make the caller handle that.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Signed-off-by: Aidan Houlihan <aidandhoulihan@gmail.com>
[daniel@redfelineninja.org.uk: Minor changes to .gitignore]
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
wasp.system cannot be safely be used from app __init__ methods. Move
the initial value settings to the foreground method instead.
Fixes: b1326e1609 ("apps: settings: Fix initial slider value")
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
When the Settings app is launched, it shows the "Mid" text (this is
correct), but the slider is at the lowest position. After moving the
slider it functions correctly, so this fix is mostly cosmetic.
Signed-off-by: kozova1 <mug66kk@gmail.com>
Currently if we wake the watch exactly N hours (where N is integer)
after it goes to sleep then the time will not be updated. Fix this the
obvious way.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Additionally we rename the screenshot to conform to the naming
convention (app.NAME + 'App.png') used for simulator screenshots.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Create a simple time queue where actions (functions or bound methods) can
be queued against the real time clock.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Signed-off-by: Carlos Gil <carlosgilglez@gmail.com>
[daniel@redfelineninja.org.uk: fix regressions on simulator, disable by
default (for now) on real hardware and remove a couple of whitespace
changes to existing files]
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
This means hardware failure won't cause the initial boot to fail. This
won't stop the heart rate app from crashing when it starts up but at
least it will give a comprehensible crash report.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Providing a status bar for all apps to use allows us to reduce allocations
within the applications.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
The main simplification is to adopt the status bar (with the status bar
clock disabled) and to restructure the way draw and redraw are handled.
Since the clock application is one of the most popular to customize it
has also had extensive commenting added to describe how it works.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently if the real battery level is <5% then a redraw from scratch will
not draw the outline of the battery. Fix this by adding a special case for
negative previous states (-1 charging, -2 redraw).
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
This is intended to be reused by any app that shows the clock as part
of the status bar at the top of the display.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
For some users the icon is pointless because they would rather install
the clock on the quick ring but this clock is something of a novelty so
it would be quite reasonable to only launch it when in the mood for
decoding something!
Happily the icon compresses nicely too!
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
This also adds the Fibonaci Clock, Haiku viewer and the Game of Life
to the manifest. They are *not* registered by default at this point
since, although we can currently spare the internal flash space there
is more competition for RAM so we have to trade off out-of-the-box
convenience with keeping as much RAM as possible for users to do
"cool things".
Given the zen of wasp-os is to try to make is as easy as possible for
users to become coders we currently favour reserving the space for the
cool things (and implicitly encouraging them to write a couple of lines
of python to enable the bonus applications.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Signed-off-by: Johannes Wache <jbwa@posteo.de>
[daniel@redfelineninja.org.uk: Tidy up the "git soup", dropped the manifest
changes and integrated the description from the original PR into the
docstring for the app]
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
This app serves as an example of using the filesystem to make an
application more flexible. Both the verses and the icon will be
loaded from the filesystem rather than being burned into the
wasp-os binaries.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Having an extra identifier for the Pin() is a waste of RAM... if you need
the CS pin then grab it from watch.flash._cspins instead.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Wake from deep power down is now handled in the driver. Remove attempt
to wake the board files.
Signed-off-by: Jeffrey Bailey <wb.jeffrey@gmail.com>
[daniel@redfelineninja.org.uk: Update commit message, simplify
slightly, extended to all boards with spinor flash and update
gitmodules to bring in the flash driver updates.]
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the simulator cannot run correctly because the indentation
in Manager.__init__ mixes tab and spaces. This is something CPython3
doesn't like but MicroPython is ok about.
Fix the obvious by using correct indentation.
Fixes: 889115f ("wasp: Allow app initialization to fail")
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently with CST816S controllers (but not CST716S controllers) then a
swipe delivered whilst the device is asleep will sometimes be processed
after we wake it up. That's never likely to be useful. Fix this by
explicitly clearing the event buffer as part of the wakeup sequence.
Reported-by: Siroj42 <siroj42@users.noreply.github.com>
Fixes: #65
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Colmi has released a new revision of the P8 hardware based on a different
accelerometer. That makes it impossible for the StepCounterApp to
initialize and currently this takes down the whole GUI due to the
uncaught exception.
Fix this by skipping applications that will not initialize.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
The screenshot is automatically named after the application currently
running and copied into the res/ directory. This allows the application
screenshots to be quickly updates if/when the screenshots get out of date
as the applications are improved.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
On a device with NEXT support we need to make sure we reset the stopwatch
when switching away from it (if it is not running) since there may not
be any other way to reset it.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Exceptions on th sleep path more or less kill the device (it is half
alseep and is not on... but not off enough for the power button to work.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the not-implemented message provokes GadgetBridget into
issuing lots of annoying toaster messages. It's still useful for debugging
but let's disable it by default.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
This is useful for devices that do not have touchscreens. It can be used
to cycle through the quick ring and to check out notifications.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the backlight is permanently on at its lowest level. The
backlight is so dim that this is almost impossible to detect. I only
found it when lying in a field in total darkness and observing that the
screen wasn't quite as black as I expected.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
The K9 is similar to the PineTime and P8 devices but does not appear
to use the CST[78]16 touch screen controllers. At present the protocol
is not known (readfrom yields all zeros, readfrom_mem provokes an
exception) so we have a hugely limited interface consisting of the side
button and the touchscreen interrupts (in other words we can treat the
touchscreen like a second button).
Works suprisingly well considering...
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
All the components (bootloader, reloader, micropython) has P8 support added
some time back but without full integration at the wasp-os level. Let's
add it!
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Notifier was a dumb name so make it better. Now that we have a decent
name it should be obvious how to handle the BLE connection status icon!
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
This requires a modified version of Gadgetbridge and currently works by
implementing the BangleJS protocol.
In Gadgetbridge ensure "Sync time" is *not* set and choose "Don't pair"
when adding the PineTime device.
This has two useful properties. Firstly it means the watch will be
maintained in the background, allowing the REPL to be used for
notifications and other updates. Secondly it will save a little bit
of power by reducing the work needed to handle spurious wake ups.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the simulator relies on the keyboard to issue touchscreen
gestures and button presses. Fix this by adding swipe detection and
introducing a skin which gives us the capability to press the button
using touchscreens or pointer devices.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
