Having an extra identifier for the Pin() is a waste of RAM... if you need
the CS pin then grab it from watch.flash._cspins instead.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Wake from deep power down is now handled in the driver. Remove attempt
to wake the board files.
Signed-off-by: Jeffrey Bailey <wb.jeffrey@gmail.com>
[daniel@redfelineninja.org.uk: Update commit message, simplify
slightly, extended to all boards with spinor flash and update
gitmodules to bring in the flash driver updates.]
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the simulator cannot run correctly because the indentation
in Manager.__init__ mixes tab and spaces. This is something CPython3
doesn't like but MicroPython is ok about.
Fix the obvious by using correct indentation.
Fixes: 889115f ("wasp: Allow app initialization to fail")
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently with CST816S controllers (but not CST716S controllers) then a
swipe delivered whilst the device is asleep will sometimes be processed
after we wake it up. That's never likely to be useful. Fix this by
explicitly clearing the event buffer as part of the wakeup sequence.
Reported-by: Siroj42 <siroj42@users.noreply.github.com>
Fixes: #65
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Colmi has released a new revision of the P8 hardware based on a different
accelerometer. That makes it impossible for the StepCounterApp to
initialize and currently this takes down the whole GUI due to the
uncaught exception.
Fix this by skipping applications that will not initialize.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
The stopwatch app support split times... let's make sure we are showing
that off in the screenshots.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
There are absolutely no changes to any milestone in the roadmap. It is
simply sorted differently.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
The screenshot is automatically named after the application currently
running and copied into the res/ directory. This allows the application
screenshots to be quickly updates if/when the screenshots get out of date
as the applications are improved.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Update the way the videos are presented. They are now tabulated and
presented as figures (e.g. captioned) rather than images. They also
now appear later in the files.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently boardless targets including softdevice, sudmodules and sim
cannot be run unless a dummy value of BOARD is supplied. Fix this by
distinguishing between conditional and unconditional expansions of the
BOARD variable.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
On a device with NEXT support we need to make sure we reset the stopwatch
when switching away from it (if it is not running) since there may not
be any other way to reset it.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Exceptions on th sleep path more or less kill the device (it is half
alseep and is not on... but not off enough for the power button to work.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the not-implemented message provokes GadgetBridget into
issuing lots of annoying toaster messages. It's still useful for debugging
but let's disable it by default.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
This is useful for devices that do not have touchscreens. It can be used
to cycle through the quick ring and to check out notifications.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the backlight is permanently on at its lowest level. The
backlight is so dim that this is almost impossible to detect. I only
found it when lying in a field in total darkness and observing that the
screen wasn't quite as black as I expected.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
[daniel@redfelineninja.org.uk: The patch author did not respond to a
request for a Signed-off-by but since there's no way a typo correction
is copyrightable (and I don't want the project to continue to look
illiterate) then I have provided my own as a substitute.]
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Mostly this is adopting policies (both DCO and Contributor Covenent)
that are commonly used by other projects...
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
- Certain Unix-like systems (such as *BSD systems) do not use /usr/bin/python3 as the default Python path. This small change will ensure a higher degree of compatibility.
Signed-off-by: Panagiotis Vasilopoulos <hello@alwayslivid.com>
The K9 is similar to the PineTime and P8 devices but does not appear
to use the CST[78]16 touch screen controllers. At present the protocol
is not known (readfrom yields all zeros, readfrom_mem provokes an
exception) so we have a hugely limited interface consisting of the side
button and the touchscreen interrupts (in other words we can treat the
touchscreen like a second button).
Works suprisingly well considering...
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
wasp-os is starting to developer proper support for multiple boards
(currently other boards such as nitrogen and ds-d6 test builds and
proof-of-concept stuff) then we need to start placing binaries for each
device into seperate directories (other wise creating a binary distro
won't work).
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
If the preprocessor fails for any reason then an empty or partially
processed watch.py file is created which will satisfy the dependency
checks in any later invocation of make which can silently break the
build. Cleaning up on failure prevents this from happening.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Not being explicit about the correct python interpreter causes trouble
on distros that do not alias python to python3 and/or that do not
install python2 by default.
Reported by: Mirko Covizzi <mrkcvzz@gmail.com>
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Direct links to the install guide mean some people are reading the docs
but never see the main docs index and, as a result, don't find the
instructions on how to build from source. Let's fix that!
Fixes: #49
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
All the components (bootloader, reloader, micropython) has P8 support added
some time back but without full integration at the wasp-os level. Let's
add it!
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Generate a .zip file that works with SoftDevice 2.0.1 (still looking
for the recipe that works with 5.0), fix up the bootloader to work with
DaFlasher and add an extra feature in micropython to cope better.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Notifier was a dumb name so make it better. Now that we have a decent
name it should be obvious how to handle the BLE connection status icon!
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
This requires a modified version of Gadgetbridge and currently works by
implementing the BangleJS protocol.
In Gadgetbridge ensure "Sync time" is *not* set and choose "Don't pair"
when adding the PineTime device.
