For small graphical items (line drawing, font glyphs) the performance
of the set_window() method is critical.
Emit native code for this function and optimize the SPI write_cmd()
method to avoid memory allocation. This give a performance boost of
a little over 15% for (24pt) font rendering and 30% for line drawing.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Avoid needless bouncing the chip select when drawing glyphs. This
improved performance by around 15% for 24pt fonts.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Add tests to make sure every app has a screenshot... and fix the
problems picked up by the new tests!
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently many first-time users excitedly install wasp-os and then
struggle to set the time using the various BLE based methods
(REPL, wasptool, GadgetBridge, etc). This results in "is there
another way to set the time" being *the* frequently asked
question.
Whilst getting the BLE tools is highly recommened to get the best
from wasp-os we can delivery a better out-of-the-box experience
for first time users is we provide on board date/time setting.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the spinner uses exclusive max when wrapping from low to high
and inclusive max when wrapping from high to low. Fix this by adopting
*inclusive* max everywhere. The call sites are similarly confused.
Fix this!
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the number of pages is (acidentally) hardcoded where it need
not be and the scroll directions aren't right as soon as we go beyond
two pages (where scroll up and down are equivalent actions).
Fix both.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
wasp-os uses a rather eccentric "2-bit" RLE encoding which works best
when there are only three colors (and black) in a single line. Modify
the screenshot slightly to allow it to be encoded with fewer palette
updated.
2048 is a popular sliding block puzzle game in which tiles are combined
to make the number 2048.
It's one of the few games that are enjoyable to play on such a small
form factor.
This started as a port of a TkInter implementation of the 2048 game. I
implemented all of the TkInter APIs used by the game and it worked on
wasp-os without any code change in the game. However, the performance
was very poor and it consumed too much RAM. I have since reimplemented
the whole game from scratch and managed to achieve acceptable
performance, although more improvements could still be made.
Because names in Python can't start with numbers, I had some trouble
naming things. The module is called "ttfe" (two-thousand-forty-eight),
the class name is Play2048App, and the software.py entry is "Play 2048".
Signed-off-by: Miguel Rochefort <miguelrochefort@gmail.com>
[daniel@redfelineninja.org.uk: Renamed the python filename, normalized
the screenshot and included the app in the docs]
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
The title will render with the last font used, and this isn't always
right for the ConfirmationView. Setting the font explicitly solves that
issue.
Signed-off-by: Miguel Rochefort <miguelrochefort@gmail.com>
Signed-off-by: Wolfgang Ginolas <wolfgang.ginolas@gwif.eu>
[daniel@redfelineninja.org.uk: squashed into a single commit, rebase to
latest master, integrate with the Software application and rename the
screenshots to match the application name]
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Switch from a headphone to music notation metaphor and take the (lazy?)
approach of using the watch chassis to frame the icon.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the simulator shows redraw artifacts that are concealed
on the real device by using display on/off. We can improve this by
avoiding the refresh when the display is off. This does not match
the behaviour of the real hardware (which goes dark during transitions)
but does make the simulator feel much more comfortable to use.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Relaunching the simulator to run tests quickly gets frustrating if
the Self Test is disabled by default. Change this.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Replace the pixelated Yes/No buttons with text based alternatives.
This also required changes to the pager to change the way the
redraw after changing view is implemented (improved muting and a reset
of the colours).
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Enabling software by default allows us disable several other applications
by default because there is now a GUI based route to enable them.
This does require a few tweaks to the test suite and allows allows us to
remove a lot of boilerplate text from the application library document
since it is no longer relavent.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently wasp-os enables a narrow set of applications because we don't
want to consume RAM by importing the module and constructing the
application. We can improve on this situation by providing a small
(stateless) application that can be used to enable or diable applications.
This allows all the ROMed applications to be enabled using the GUI
without compromising on the ability to develop applications.
In fact this application significantlly reduces the RAM consumed in the
default case becasue the Self Test app does not need to maintain its
state.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
The checkbox uses the _im(mutable) idiom to minimize the RAM overhead
of its immutable properties (position and label). However it can be useful
to retrieve the label to provide a property accessor.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
By default bright and mid are white/grey tones, the ui widgets are
blue and the spot colours are different variants of orange.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the theme is explicitly little endian. This does match the
underlying hardware but makes it needlessly difficult to hand edit
themes. Switch the default theme and theming tools over to big endian
form and add comments to the default theme to support hand editing.
We also expand the ASCII characters in the default them with hex codes.
This is the final step needed to make hand edited themes trivial to work
with.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the bma421 driver simple re-initializes the sensor when asked
to set the step counter to zero. Switch over to the proper function
for this.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
The ConfirmationView became broken when we converted it's images over to
2-bit RLE. That happened because the confirmation view relied on the
the 1-bit RLE to dynamically generate hit boxes.
Currently the code pre-calculates the hit box which is a waste of RAM.
Let's rip out the existing hit box logic and replace it with much larger
("fat finger") hit targets.
We make the touch() method more closely adopt the idioms of other UI
components (e.g. don't return the dialog status... just whether or
not we handled the touch).
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
The alarm is off by default so there's no reason to set an alarm that
is disabled. Let's stop doing that.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
We are able to add this to the self tests without having to create a
special page. Instead we can modify the existing notifications test
to utilize the spinner.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Add functions to generate shades from a single (usually theme provided)
basic palette colour.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently if you spend more then 15 seconds looking up figures or
transcribing the answer then the system will switch back to the
clock and the answer will be lost.
Fix this by remembering the output between invocations.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently calculations such as 22/7 do not work correctly on the
simulator (which uses double precision floating point). Fix this
by explicitly truncating the strings when needed.
Additionally the current calculate() method has some problems when
the calculation cannot be evaluated since it will needlessly clear out
the calculation. Push calculate (and the exception handling) into the
caller and report errors using the vibration motor instead.
Finally we rename display_output() to the more idiomatic _update().
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the fields is a list of lists of strings. This will needlessly
consume RAM so lets switch it over to a simple string (which is immutable
and can be stored in flash).
We also replace indices with simple x and y variables. In addition to
avoiding a (temporary) memory allocation this is also easier to use
when looking up in fields.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the calculator uses an open grid. It's a matter of taste but
I prefer a closed grid.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the coordindates used for line drawing are "tuned" for a bug in
the line drawing code (and now draw off the edge of the screen). Fix this.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the empty string cannot be drawn into a fixed width box.
Fix this by adding a special case for empty strings.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the line drawing code does not draw the final pixel of
straight lines. Thus a line from (0, 0) to (10, 10) finishes on a
different pixel to (10, 0) to (10, 10).
Fix this by removing the spurious subtract one from the end point
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
The 2-bit RLE encoding, in addition to supporting colour is also fully
ROMable meaning we can save 32 bytes of RAM per image by switching to
2-bit encoding.
Switch everything in icons and font.clock over to 2-bit encoding.
Note: this requires all the clock PNG files to be reencoded (because
they were originally in 1-bit grayscale format and this is no
longer supported by the encoder).
This reduces RAM overhead by 480 bytes and has only a negligable effect
on FLASH usage (+4 bytes).
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the battery icon is overlarge compared to other status bar
icons such as the BT and notification icons (both of which are 32px
high). Fix this by redrawing the battery artwork and updating
the widgets in the status bar.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Update the icon so it more closely resembles the in-game visual style
(and also so it compresses better) and update the screenshot since the
old one is the wrong size (FullHD instead of 358x406) and doesn't render
correctly in the documentation.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Make the ticks and hands larger and shorten the hands slightly to avoid
visual glitches during "undraw".
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Polar coordinates are very convenient for implementing anything with
radial lines (such as a traditional watch face).
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently all lines are a single pixel wide. To draw wider lines we
must draw two parallel lines with a single pixel offset and this is
a *very* inefficient approach, espeically on ST7789 where we spend
longer setting the clipping window than we do drawing each pixel.
Fix this by constructing a line using a variable sized square rather than
a single pixel. This will "overdraw" (some pixels will be drawn more than
once) but since square blocks can be efficiently transferred to the
display the overdraw is acceptable.
Note: It is a difficult decision whether to maintain the convention that
color is the last argument or to keep compatibility with existing
line drawing tests. This patch opts for the former and fixes up
all uses within the existing codebase.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently there are default argument values for the start and end
coordinates but the defaults don't really make any sense since there
is no reason to prefer the value 0 over any other. Remove them.
Similarly color currently defaults to 0xffff which isn't right. It
should default to the foreground colour.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently `make check` doesn't test any not-default applications.
Fix this by automatically discovering constructors and ensure that the
application can be started and stopped without generating an exception.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Add the battery frame to the theme so it matches the frame used for
charging and rename accordingly.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
This theming engine uses a bytestring (but supports anything indexable,
as long as the index results are a byte long),
stored as `wasp.system._theme`.
It has a default value, which should not change anything about the way this looks currently.
The theme can be set via `wasp.system.set_theme`,
but this should *ONLY* be used in `main.py`.
`wasp.system.set_theme` will return True if it was successful,
or False if the theme is of an old format.
Using an old format theme will *not* crash the watch,
but will use the default theme instead.
To theme this, one has to use tools/themer.py (use flag -h for complete explanation)
to generate a bytestring that's added in main.py (see diff).
The bytestring is then loaded into 'wasp.system._theme'.
Theme values can be looked up by apps by using `wasp.system.theme("theme-key")`.
Theme keys appear in the function body of `wasp.system.theme()`.
I've took the liberty of converting existing apps to use this method,
and it seems to work well.
A test theme is provided in `tools/test_theme.py`
Signed-off-by: kozova1 <mug66kk@gmail.com>
This is the API:
drawable.line(x1, y1, x2, y2, color)
The function has optimizations for the case of vertical or horizontal lines.
Signed-off-by: Kozova1 <mug66kk@gmail.com>
[daniel@redfelineninja.org.uk: Minor update to commit message]
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
This makes the simulator look nicer when it starts up... but it
doesn't help the simulator.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently we can act on the controls but we cannot "see" the display
in the test suite. That leads us to a slightly odd form of "grey box"
testing. It's functionally black box testing but some of the asserts
have to reach inside the components instead of looking at the display.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the tests do little more than fire up the simulator and
switch into (and out of) the built in applications. However this is
useful and allows us to fully integrate as a CI job.
Unfortunately the numpy warning from pysdl2 mean we have been forced
to disable all warnings to prevent pytest from collecting and reporting
them.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Signed-off-by: Carlos Gil Gonzalez <carlosgilglez@gmail.com>
[daniel@redfelineninja.org.uk: Fixed board support for simulator and
sphinx (a.k.a. doc builder)]
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Signed-off-by: Johannes Wache <jbwa@posteo.de>
[daniel@redfelineninja.org.uk: Removed some couple of unwanted merge artifacts]
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Like the other library applications this is enabled in the simulator and
included in the flash image but is disabled by default to conserve RAM
(and to give time to new apps to mature and receive improvements).
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the widgets react to touch when the alarm is ringing (and they
are invisible. For now we fix this by disabling the alarm on a touch
event. Maybe the app should reject touch events since they could acidentally
dismiss the alarm... but we already disable the alarm if we get a swipe
event so this doesn't make things much worse than they already are!
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
The long term plan is to retire and remove the 1-bit RLE code from wasp-os
so we don't want new icons using that encoding.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the swipe handling added for the confirmation view has a number
of prolems: it does not work at all for multi-screen notifications, it
interferes with the haptic feedback if we keep swiping down and an up
swipe incorrectly dismisses whole notification app.
Fix these.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently the confirmation view remains active when we switch away from
the notification view. Ensure we dismiss when we background the
application.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Currently there are detailed hit boxes in the confirmation view widget
but any inaccurate hit is treated as No anyway by the notification app.
Additionally selecting 'No' dismisses the whole notification app rather
than just the confirmation view.
Fix the event handling so that we ignore touches outside the hit box and
only dismiss the whole notification app if we actually clear the
notifications.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
When the buttons are pressed then the widget should be dismissed. There
is no reason to make the caller handle that.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
Signed-off-by: Aidan Houlihan <aidandhoulihan@gmail.com>
[daniel@redfelineninja.org.uk: Minor changes to .gitignore]
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
wasp.system cannot be safely be used from app __init__ methods. Move
the initial value settings to the foreground method instead.
Fixes: b1326e1609 ("apps: settings: Fix initial slider value")
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
