pinetime/wasp-os
1
0
Fork 0
Code Activity

docs: Document installation via Gadgetbridge (#480)

Browse source 
Signed-off-by: GaryM0101 <gary@geekslounge.com>
This commit is contained in:
Gary Myers 2024-08-05 13:34:56 -07:00 committed by GitHub
parent ce1a2634f0
commit 7d156cdc05
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
1 changed files with 36 additions and 20 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

56
docs/install.rst
View file

@ -243,9 +243,9 @@ screen, a step counter and a heart rate sensor.
wasp-os can be installed directly from the factory default operating
system using an over-the-air update with no tools or disassembly
required. nRF Connect for Android can be used to install both the
:ref:`wasp-bootloader<Bootloader nRF Connect>` and the
:ref:`main OS image<Main OS nRF Connect>`.
required. Gadgetbridge for Android can be used to install both the
:ref:`wasp-bootloader<Bootloader Gadgetbridge>` and the
:ref:`main OS image<Main OS Gadgetbridge>`.
.. note::
@ -330,12 +330,12 @@ DaFlasher for Android can be used to install both the
Installing wasp-bootloader
--------------------------
.. _Bootloader nRF Connect:
.. _Bootloader Gadgetbridge:
nRF Connect for Android
~~~~~~~~~~~~~~~~~~~~~~~
Gadgetbridge for Android
~~~~~~~~~~~~~~~~~~~~~~~~
For Pine64 PineTime devices running Infinitime then nRF Connect for Android
For Pine64 PineTime devices running Infinitime then Gadgetbridge for Android
can be used to install wasp-bootloader:
* Ensure the watch is fully charged before attempting to install the
@ -343,12 +343,14 @@ can be used to install wasp-bootloader:
sealed devices.
* Copy ``reloader-mcuboot.zip`` (see :ref:`Building wasp-os from source`) to
your Android device and download
`nRF Connect <https://play.google.com/store/apps/details?id=no.nordicsemi.android.mcp>`_
`Gadgetbridge <https://f-droid.org/en/packages/nodomain.freeyourgadget.gadgetbridge/>`_
for Android if you do not already have it.
* Wake the device so that Infinitime is showing a watch face.
* Connect to the *Infinitime* device usnig nRF Connect, click the DFU button
and send ``reloader-mcuboot.zip`` to the device.
* When the progress meter reaches 100% the nRF Connect will disconnect
* Connect to the *Infinitime* device usnig Gadgetbridge, tap on the "+" button on the
bottom right of the screen to add a new device, *Infinitime* should be detected.
* Tap on it and Gadgdetbridge will pair and connect to your device. Use the file browser
application and find and send ``reloader-mcuboot.zip`` to the device.
* When the progress meter reaches 100% Gadgetbridge will disconnect
and the watch will reboot.
* The watch will boot the reloader application which draws a small blue
pine cone in the centre of the screen. The pine cone acts a progress
@ -366,9 +368,11 @@ can be used to install wasp-bootloader:
.. note::
If you want to restore the PineTime factory firmware then you can
use nRF Connect to do this. Perform a long press reset and then
use nRF Connect to send ``reloader-factory.zip`` to the *PineDFU*
device.
use Gadgetbridge to do this. Perform a long press reset and then
use Gadgetbridge to send ``reloader-factory.zip`` to the *PineDFU*
device. GadgetBridge may list *PINE DFU* as an unsupported device.
See the work around at the end of
:ref:`main OS image<Main OS Gadgetbridge>`.
.. _Bootloader DaFlasher:
@ -465,23 +469,35 @@ logo and wait for a OTA update.
Installing wasp-os
------------------
.. _Main OS nRF Connect:
.. _Main OS Gadgetbridge:
nRF Connect for Android
~~~~~~~~~~~~~~~~~~~~~~~
Gadgetbridge for Android
~~~~~~~~~~~~~~~~~~~~~~~~
To install the main firmware using nRF Connect for Android:
To install the main firmware using Gadgetbridge for Android:
* Copy ``micropython.zip`` (see :ref:`Building wasp-os from source`) to
your Android device and download
`nRF Connect <https://play.google.com/store/apps/details?id=no.nordicsemi.android.mcp>`_
`Gadgetbridge <https://f-droid.org/en/packages/nodomain.freeyourgadget.gadgetbridge/>`_
for Android if you do not already have it.
* Ensure the watch is running in :ref:`OTA update mode<OTA update mode>`.
* Connect to the device (e.g. *PineDFU* if you have a PineTime) using
nRFConnect, click the DFU button and send ``micropython.zip`` to the device.
Gadgetbridge, use the file browser application and send ``micropython.zip`` to the
device.
* When the upload is complete the watch will reboot and launch the digital
clock application.
.. note::
GadgetBridge may list PINE DFU as an unsupported device. This prevents users from
sending the ``micropython.zip`` file to the device. Do the following to work around
this: In GadgetBridge, go to discovery and pairing options and allow unsupported
devices.
The Pinetime will show up as an unsupported device. Long-press it and select Add
as a test device. A list of devices will show up. Scroll down to Pinetime and select
it. The device will be added and you then can upload the ``micropython.zip`` file.
.. _Main OS DaFlasher:
DaFlasher for Android