wasp-os/Makefile

export PYTHONPATH := $(PWD)/tools/nrfutil:$(PWD)/tools/intelhex:$(PYTHONPATH)

all : bootloader reloader micropython

BOARD ?= $(error Please set BOARD=)

clean :
	$(RM) -r \
		bootloader/_build-$(BOARD)_nrf52832 \
		reloader/build-$(BOARD) reloader/src/boards/$(BOARD)/bootloader.h \
		micropython/mpy-cross/build \
		micropython/ports/nrf/build-$(BOARD)-s132

submodules :
	git submodule update --init --recursive

bootloader:
	$(MAKE) -C bootloader/ BOARD=$(BOARD)_nrf52832 all genhex
	python3 tools/hexmerge.py \
		bootloader/_build-$(BOARD)_nrf52832/$(BOARD)_nrf52832_bootloader-*-nosd.hex \
		bootloader/lib/softdevice/s132_nrf52_6.1.1/s132_nrf52_6.1.1_softdevice.hex \
		-o bootloader.hex
	python3 tools/hex2c.py bootloader.hex > \
		reloader/src/boards/$(BOARD)/bootloader.h

reloader: bootloader
	$(MAKE) -C reloader/ BOARD=$(BOARD)
	mv reloader/build-$(BOARD)/reloader.zip .

softdevice:
	micropython/ports/nrf/drivers/bluetooth/download_ble_stack.sh

micropython: wasp/boards/pinetime/watch.py
	$(MAKE) -C micropython/mpy-cross
	$(RM) micropython/ports/nrf/build-$(BOARD)-s132/frozen_content.c
	$(MAKE) -C micropython/ports/nrf \
		BOARD=$(BOARD) SD=s132 \
		MICROPY_VFS_LFS2=1 \
		FROZEN_MANIFEST=$(PWD)/wasp/boards/$(BOARD)/manifest.py \
		USER_C_MODULES=$(PWD)/wasp/modules
	python3 -m nordicsemi dfu genpkg \
		--dev-type 0x0052 \
		--application micropython/ports/nrf/build-$(BOARD)-s132/firmware.hex \
		micropython.zip

wasp/boards/pinetime/watch.py : wasp/boards/pinetime/watch.py.in
	(cd wasp; ../tools/preprocess.py boards/pinetime/watch.py.in > \
		                         boards/pinetime/watch.py)

dfu:
	python3 -m nordicsemi dfu serial --package micropython.zip --port /dev/ttyACM0

flash:
	pyocd erase -t nrf52 --mass
	pyocd flash -t nrf52 bootloader.hex

debug:
	arm-none-eabi-gdb \
		bootloader/_build-$(BOARD)_nrf52832/$(BOARD)_nrf52832_bootloader-*-nosd.out \
		-ex "target extended-remote /dev/ttyACM0" \
		-ex "monitor swdp_scan" \
		-ex "attach 1" \
		-ex "load"

docs:
	$(RM) -rf docs/build/html/*
	$(MAKE) -C docs html
	touch docs/build/html/.nojekyll


sim:
	PYTHONDONTWRITEBYTECODE=1 PYTHONPATH=.:wasp/boards/simulator:wasp \
	python3 -i wasp/main.py

.PHONY: bootloader reloader docs micropython
Initial revision This is a just a rather hacky combined build environment. 2020-01-14 22:32:59 +01:00			`export PYTHONPATH := $(PWD)/tools/nrfutil:$(PWD)/tools/intelhex:$(PYTHONPATH)`

reloader: Integrate into the main build system 2020-05-09 15:09:28 +02:00			`all : bootloader reloader micropython`
Initial revision This is a just a rather hacky combined build environment. 2020-01-14 22:32:59 +01:00
Makefile: Allow BOARD to come from the environment 2020-02-01 14:40:19 +01:00			`BOARD ?= $(error Please set BOARD=)`
Makefile: Get user to supply BOARD= and job count 2020-01-20 09:05:31 +01:00
Initial revision This is a just a rather hacky combined build environment. 2020-01-14 22:32:59 +01:00			`clean :`
Makefile: Allow BOARD to come from the environment 2020-02-01 14:40:19 +01:00			`$(RM) -r \`
Makefile: Get user to supply BOARD= and job count 2020-01-20 09:05:31 +01:00			`bootloader/_build-$(BOARD)_nrf52832 \`
reloader: Integrate into the main build system 2020-05-09 15:09:28 +02:00			`reloader/build-$(BOARD) reloader/src/boards/$(BOARD)/bootloader.h \`
Initial revision This is a just a rather hacky combined build environment. 2020-01-14 22:32:59 +01:00			`micropython/mpy-cross/build \`
Makefile: Get user to supply BOARD= and job count 2020-01-20 09:05:31 +01:00			`micropython/ports/nrf/build-$(BOARD)-s132`
Initial revision This is a just a rather hacky combined build environment. 2020-01-14 22:32:59 +01:00
			`submodules :`
			`git submodule update --init --recursive`

			`bootloader:`
Makefile: Get user to supply BOARD= and job count 2020-01-20 09:05:31 +01:00			`$(MAKE) -C bootloader/ BOARD=$(BOARD)_nrf52832 all genhex`
Initial revision This is a just a rather hacky combined build environment. 2020-01-14 22:32:59 +01:00			`python3 tools/hexmerge.py \`
Makefile: Get user to supply BOARD= and job count 2020-01-20 09:05:31 +01:00			`bootloader/_build-$(BOARD)_nrf52832/$(BOARD)_nrf52832_bootloader-*-nosd.hex \`
Initial revision This is a just a rather hacky combined build environment. 2020-01-14 22:32:59 +01:00			`bootloader/lib/softdevice/s132_nrf52_6.1.1/s132_nrf52_6.1.1_softdevice.hex \`
			`-o bootloader.hex`
reloader: OTA flashing tool for wasp-os 2020-04-26 20:21:28 +02:00			`python3 tools/hex2c.py bootloader.hex > \`
			`reloader/src/boards/$(BOARD)/bootloader.h`
Initial revision This is a just a rather hacky combined build environment. 2020-01-14 22:32:59 +01:00
reloader: Integrate into the main build system 2020-05-09 15:09:28 +02:00			`reloader: bootloader`
			`$(MAKE) -C reloader/ BOARD=$(BOARD)`
			`mv reloader/build-$(BOARD)/reloader.zip .`

Makefile: Add shortcut to download the softdevice binary 2020-01-20 09:07:35 +01:00			`softdevice:`
			`micropython/ports/nrf/drivers/bluetooth/download_ble_stack.sh`

wasp: Automatically generate watch.py for PineTime This should ensure that main.py is always up to date. 2020-04-11 22:12:18 +02:00			`micropython: wasp/boards/pinetime/watch.py`
Makefile: Get user to supply BOARD= and job count 2020-01-20 09:05:31 +01:00			`$(MAKE) -C micropython/mpy-cross`
Makefile: Forcible remove frozen content The micropython build system has incomplete dependancy tracking, especially with regard to frozen manifests. Work round this by nuking the frozen content before attempting a build. Sure this is a hack... but much better than developing a "make clean; make all" habit. 2020-01-30 22:45:35 +01:00			`$(RM) micropython/ports/nrf/build-$(BOARD)-s132/frozen_content.c`
wasp: st7789: Add a simple proof-of-concept display driver 2020-01-21 23:10:50 +01:00			`$(MAKE) -C micropython/ports/nrf \`
			`BOARD=$(BOARD) SD=s132 \`
micropython: Enable filesystem support 2020-02-09 20:47:57 +01:00			`MICROPY_VFS_LFS2=1 \`
wasp: apps: Step counter application Currently there's no fancy algorithms to estimate stride length. Just pure simple step counting directly from the hardware's "intelligence engine". Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk> 2020-06-09 22:29:00 +02:00			`FROZEN_MANIFEST=$(PWD)/wasp/boards/$(BOARD)/manifest.py \`
			`USER_C_MODULES=$(PWD)/wasp/modules`
Initial revision This is a just a rather hacky combined build environment. 2020-01-14 22:32:59 +01:00			`python3 -m nordicsemi dfu genpkg \`
			`--dev-type 0x0052 \`
Makefile: Get user to supply BOARD= and job count 2020-01-20 09:05:31 +01:00			`--application micropython/ports/nrf/build-$(BOARD)-s132/firmware.hex \`
Initial revision This is a just a rather hacky combined build environment. 2020-01-14 22:32:59 +01:00			`micropython.zip`
Makefile: Add shortcut to download the softdevice binary 2020-01-20 09:07:35 +01:00
wasp: Automatically generate watch.py for PineTime This should ensure that main.py is always up to date. 2020-04-11 22:12:18 +02:00			`wasp/boards/pinetime/watch.py : wasp/boards/pinetime/watch.py.in`
			`(cd wasp; ../tools/preprocess.py boards/pinetime/watch.py.in > \`
			`boards/pinetime/watch.py)`

Initial revision This is a just a rather hacky combined build environment. 2020-01-14 22:32:59 +01:00			`dfu:`
			`python3 -m nordicsemi dfu serial --package micropython.zip --port /dev/ttyACM0`

			`flash:`
Makefile: Match command line arguments with latest version of pyOCD 2020-05-09 15:07:32 +02:00			`pyocd erase -t nrf52 --mass`
Makefile: Switch to pyocd for flashing Using the mass storage device mode on Nitrogen leaves the board in an odd state where the bootloader cannot properly load the payload. 2020-01-20 09:08:22 +01:00			`pyocd flash -t nrf52 bootloader.hex`
Initial revision This is a just a rather hacky combined build environment. 2020-01-14 22:32:59 +01:00
Makefile: Shortcut to help update the bootloader using BMP 2020-01-28 22:25:17 +01:00			`debug:`
			`arm-none-eabi-gdb \`
			`bootloader/_build-$(BOARD)_nrf52832/$(BOARD)_nrf52832_bootloader-*-nosd.out \`
			`-ex "target extended-remote /dev/ttyACM0" \`
			`-ex "monitor swdp_scan" \`
			`-ex "attach 1" \`
			`-ex "load"`

docs: Use sphinx to gather together all the wasp docs 2020-02-22 22:17:30 +01:00			`docs:`
docs: Add .nojeykyll for better github compatiblity 2020-02-24 09:51:25 +01:00			`$(RM) -rf docs/build/html/*`
docs: Use sphinx to gather together all the wasp docs 2020-02-22 22:17:30 +01:00			`$(MAKE) -C docs html`
docs: Add .nojeykyll for better github compatiblity 2020-02-24 09:51:25 +01:00			`touch docs/build/html/.nojekyll`
docs: Use sphinx to gather together all the wasp docs 2020-02-22 22:17:30 +01:00

wasp: simulator: First steps towards a simulator Currently this just traces SPI activity from the ST7789 driver but its a good baseline to start building up test functions from. 2020-01-31 20:36:55 +01:00			`sim:`
docs: Introduce the Application Writer's Guide. 2020-05-10 15:10:04 +02:00			`PYTHONDONTWRITEBYTECODE=1 PYTHONPATH=.:wasp/boards/simulator:wasp \`
docs: Use sphinx to gather together all the wasp docs 2020-02-22 22:17:30 +01:00			`python3 -i wasp/main.py`
wasp: simulator: First steps towards a simulator Currently this just traces SPI activity from the ST7789 driver but its a good baseline to start building up test functions from. 2020-01-31 20:36:55 +01:00
reloader: Integrate into the main build system 2020-05-09 15:09:28 +02:00			`.PHONY: bootloader reloader docs micropython`
Initial revision This is a just a rather hacky combined build environment. 2020-01-14 22:32:59 +01:00