1
0
Fork 0
InfiniTime/.github/workflows/main.yml
Riku Isokoski 028d40860d workflows: Add build size comparison workflow
Add .github/workflows/getSize.sh to extract sizes of sections from the
objfile

build-firmware uses getSize.sh to output the section sizes.

get-base-ref-size job added, which builds the base branch of the PR and
outputs the section sizes. Caches are used to avoid unnecessary builds
when the base branch hasn't been updated.

leave-build-size-comment job added, which creates or updates a comment
on the PR with the build size information from other jobs.
2023-01-07 18:56:15 +02:00

189 lines
6.4 KiB
YAML

name: CI
# Run this workflow whenever the build may be affected
on:
push:
branches: [ master, develop ]
paths-ignore:
- 'doc/**'
- '**.md'
pull_request:
branches: [ develop ]
paths-ignore:
- 'doc/**'
- '**.md'
jobs:
build-firmware:
runs-on: ubuntu-latest
container:
image: infinitime/infinitime-build
outputs:
text_size: ${{ steps.output-sizes.outputs.text_size }}
data_size: ${{ steps.output-sizes.outputs.data_size }}
bss_size: ${{ steps.output-sizes.outputs.bss_size }}
env:
# InfiniTime sources are downloaded to the current directory.
# Override SOURCES_DIR in build.sh
SOURCES_DIR: .
steps:
- name: Checkout source files
uses: actions/checkout@v3
with:
submodules: recursive
- name: Build
shell: bash
run: /opt/build.sh all
- name: Output build size
id: output-sizes
run: |
. /opt/build.sh
.github/workflows/getSize.sh "$BUILD_DIR"/src/pinetime-app-*.out >> $GITHUB_OUTPUT
# Unzip the package because Upload Artifact will zip up the files
- name: Unzip DFU package
run: unzip ./build/output/pinetime-mcuboot-app-dfu-*.zip -d ./build/output/pinetime-mcuboot-app-dfu
- name: Upload DFU artifacts
uses: actions/upload-artifact@v3
with:
name: InfiniTime DFU ${{ github.head_ref }}
path: ./build/output/pinetime-mcuboot-app-dfu/*
- name: Upload MCUBoot image artifacts
uses: actions/upload-artifact@v3
with:
name: InfiniTime MCUBoot image ${{ github.head_ref }}
path: ./build/output/pinetime-mcuboot-app-image-*.bin
- name: Upload resources artifacts
uses: actions/upload-artifact@v3
with:
name: InfiniTime resources ${{ github.head_ref }}
path: ./build/output/infinitime-resources-*.zip
build-simulator:
runs-on: ubuntu-latest
steps:
- name: Install cmake
uses: lukka/get-cmake@v3.18.3
- name: Install SDL2 development package
run: |
sudo apt-get update
sudo apt-get -y install libsdl2-dev
- name: Install lv_font_conv
run:
npm i -g lv_font_conv@1.5.2
- name: Checkout source files
uses: actions/checkout@v2
with:
submodules: recursive
- name: Get InfiniSim repo
run: |
git clone https://github.com/InfiniTimeOrg/InfiniSim.git --depth 1 --branch main
git -C InfiniSim submodule update --init lv_drivers libpng
- name: CMake
# disable BUILD_RESOURCES as this is already done when building the firmware
run: |
cmake -G Ninja -S InfiniSim -B build_lv_sim -DInfiniTime_DIR="${PWD}" -DBUILD_RESOURCES=OFF
- name: Build simulator executable
run: |
cmake --build build_lv_sim
- name: Upload simulator executable
uses: actions/upload-artifact@v3
with:
name: infinisim-${{ github.head_ref }}
path: build_lv_sim/infinisim
get-base-ref-size:
if: github.event_name == 'pull_request'
runs-on: ubuntu-22.04
container:
image: infinitime/infinitime-build
outputs:
text_size: ${{ steps.output-sizes.outputs.text_size }}
data_size: ${{ steps.output-sizes.outputs.data_size }}
bss_size: ${{ steps.output-sizes.outputs.bss_size }}
env:
# InfiniTime sources are downloaded to the current directory.
# Override SOURCES_DIR in build.sh
SOURCES_DIR: .
steps:
- name: Cache sources
id: cache-sources
uses: actions/cache@v3
with:
path: .
key: source-files-${{ github.event.pull_request.base.sha }}
- if: ${{ steps.cache-sources.outputs.cache-hit != 'true' }}
name: Checkout source files
uses: actions/checkout@v3
with:
ref: ${{ github.base_ref }}
submodules: recursive
- if: ${{ steps.cache-sources.outputs.cache-hit != 'true' }}
name: Build
shell: bash
# Only pinetime-app target is needed, but post_build.sh fails
run: /opt/build.sh all
- name: Output build size
id: output-sizes
run: |
. /opt/build.sh
.github/workflows/getSize.sh "$BUILD_DIR"/src/pinetime-app-*.out >> $GITHUB_OUTPUT
leave-build-size-comment:
if: github.event_name == 'pull_request'
needs: [build-firmware, get-base-ref-size]
runs-on: ubuntu-latest
steps:
- name: Compare build size
id: output-sizes-diff
run: |
TEXT_SIZE=${{ needs.build-firmware.outputs.text_size }}
DATA_SIZE=${{ needs.build-firmware.outputs.data_size }}
BSS_SIZE=${{ needs.build-firmware.outputs.bss_size }}
echo "text_size=$TEXT_SIZE" >> $GITHUB_OUTPUT
echo "data_size=$DATA_SIZE" >> $GITHUB_OUTPUT
echo "bss_size=$BSS_SIZE" >> $GITHUB_OUTPUT
TEXT_SIZE_BASE=${{ needs.get-base-ref-size.outputs.text_size }}
DATA_SIZE_BASE=${{ needs.get-base-ref-size.outputs.data_size }}
BSS_SIZE_BASE=${{ needs.get-base-ref-size.outputs.bss_size }}
TEXT_SIZE_DIFF=$((TEXT_SIZE - TEXT_SIZE_BASE))
DATA_SIZE_DIFF=$((DATA_SIZE - DATA_SIZE_BASE))
BSS_SIZE_DIFF=$((BSS_SIZE - BSS_SIZE_BASE))
echo "text_diff=$TEXT_SIZE_DIFF" >> $GITHUB_OUTPUT
echo "data_diff=$DATA_SIZE_DIFF" >> $GITHUB_OUTPUT
echo "bss_diff=$BSS_SIZE_DIFF" >> $GITHUB_OUTPUT
- name: Find Comment
uses: peter-evans/find-comment@v2
id: build-size-comment
with:
issue-number: ${{ github.event.pull_request.number }}
comment-author: 'github-actions[bot]'
body-includes: Build size and comparison to
- name: Create or update comment
uses: peter-evans/create-or-update-comment@v2
with:
comment-id: ${{ steps.build-size-comment.outputs.comment-id }}
issue-number: ${{ github.event.pull_request.number }}
body: |
Build size and comparison to ${{ github.base_ref }}:
| Section | Size | Difference |
| ------- | ---- | ---------- |
| text | ${{ needs.build-firmware.outputs.text_size }}B | ${{ steps.output-sizes-diff.outputs.text_diff }}B |
| data | ${{ needs.build-firmware.outputs.data_size }}B | ${{ steps.output-sizes-diff.outputs.data_diff }}B |
| bss | ${{ needs.build-firmware.outputs.bss_size }}B | ${{ steps.output-sizes-diff.outputs.bss_diff }}B |
edit-mode: replace