Add debugPins module that provides functions to set and clear debug GPIOs.

Disable logging once again.

CMakeLists.txt

@@ -37,6 +37,10 @@ if(USE_OPENOCD)
   endif()
 endif()
 
+if(DEFINED USE_DEBUG_PINS AND USE_DEBUG_PINS)
+  add_definitions(-DUSE_DEBUG_PINS)
+endif()
+
 message("BUILD CONFIGURATION")
 message("-------------------")
 message("    * Version : " ${PROJECT_VERSION_MAJOR}.${PROJECT_VERSION_MINOR}.${PROJECT_VERSION_PATCH})
@@ -53,6 +57,11 @@ elseif(USE_GDB_CLIENT)
 elseif(USE_OPENOCD)
   message("    * Programmer/debugger : OpenOCD Client")
 endif()
+if(USE_DEBUG_PINS)
+  message("    * Debug pins : Enabled")
+else()
+  message("    * Debug pins : Disabled")
+endif()
 
 set(VERSION_EDIT_WARNING "// Do not edit this file, it is automatically generated by CMAKE!")
 configure_file(${CMAKE_CURRENT_SOURCE_DIR}/src/Version.h.in ${CMAKE_CURRENT_SOURCE_DIR}/src/Version.h)

src/CMakeLists.txt

@@ -178,6 +178,7 @@ list(APPEND SOURCE_FILES
   drivers/St7789.cpp
   drivers/SpiMaster.cpp
   drivers/Watchdog.cpp
+  drivers/DebugPins.cpp
   BLE/BleManager.c
   Components/Battery/BatteryController.cpp
   Components/Ble/BleController.cpp
@@ -211,6 +212,7 @@ set(INCLUDE_FILES
   drivers/St7789.h
   drivers/SpiMaster.h
   drivers/Watchdog.h
+  drivers/DebugPins.h
   BLE/BleManager.h
   Components/Battery/BatteryController.h
   Components/Ble/BleController.h

src/drivers/DebugPins.cpp

@@ -0,0 +1,49 @@
+#include <hal/nrf_gpio.h>
+#include "DebugPins.h"
+
+#ifdef USE_DEBUG_PINS
+void debugpins_init() {
+  nrf_gpio_cfg_output(DebugPin0);
+  nrf_gpio_pin_clear(DebugPin0);
+
+  nrf_gpio_cfg_output(DebugPin1);
+  nrf_gpio_pin_clear(DebugPin1);
+
+  nrf_gpio_cfg_output(DebugPin2);
+  nrf_gpio_pin_clear(DebugPin2);
+
+  nrf_gpio_cfg_output(DebugPin3);
+  nrf_gpio_pin_clear(DebugPin3);
+
+  nrf_gpio_cfg_output(DebugPin4);
+  nrf_gpio_pin_clear(DebugPin4);
+}
+void debugpins_set(debugpins_pins pin) {
+  nrf_gpio_pin_set((uint32_t)(pin));
+}
+
+void debugpins_clear(debugpins_pins pin) {
+  nrf_gpio_pin_clear((uint32_t)(pin));
+}
+
+void debugpins_pulse(debugpins_pins pin) {
+  nrf_gpio_pin_set((uint32_t)(pin));
+  nrf_gpio_pin_clear((uint32_t)(pin));
+}
+#else
+void debugpins_init() {
+
+}
+void debugpins_set(debugpins_pins pin) {
+
+}
+
+void debugpins_clear(debugpins_pins pin) {
+
+}
+
+void debugpins_pulse(debugpins_pins pin) {
+
+}
+
+#endif

src/drivers/DebugPins.h

@@ -0,0 +1,25 @@
+#pragma once
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+typedef enum {
+  DebugPin0 = 27,
+  DebugPin1 = 29,
+  DebugPin2 = 20,
+  DebugPin3 = 17,
+  DebugPin4 = 11,
+} debugpins_pins;
+
+void debugpins_init();
+void debugpins_set(debugpins_pins pin);
+void debugpins_clear(debugpins_pins pin);
+void debugpins_pulse(debugpins_pins pin);
+
+#ifdef __cplusplus
+}
+#endif
+

src/sdk_config.h

@@ -8452,15 +8452,15 @@
 // <e> NRF_LOG_ENABLED - nrf_log - Logger
 //==========================================================
 #ifndef NRF_LOG_ENABLED
-#define NRF_LOG_ENABLED 1
+#define NRF_LOG_ENABLED 0
 #endif
 
 #ifndef NRF_LOG_BACKEND_RTT_ENABLED
-#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
 #endif
 
 #ifndef NRF_LOG_BACKEND_SERIAL_USES_RTT
-#define NRF_LOG_BACKEND_SERIAL_USES_RTT 1
+#define NRF_LOG_BACKEND_SERIAL_USES_RTT 0s
 #endif
 // <h> Log message pool - Configuration of log message pool