selfhostblocks/demo/nextcloud/README.md

# Nextcloud Demo {#demo-nextcloud}

**This whole demo is highly insecure as all the private keys are available publicly. This is
only done for convenience as it is just a demo. Do not expose the VM to the internet.**

The [`flake.nix`](./flake.nix) file sets up a Nextcloud server in only about [15
lines](./flake.nix#L29-L45) of related code.

This guide will show how to deploy this setup to a Virtual Machine, like showed
[here](https://nixos.wiki/wiki/NixOS_modules#Developing_modules), in 6 commands.

## Deploy to the VM {#deploy-to-the-vm}

Build the VM and start it:

```bash
rm nixos.qcow2; \
  nixos-rebuild build-vm-with-bootloader --fast -I nixos-config=./configuration.nix -I nixpkgs=. ; \
  QEMU_NET_OPTS="hostfwd=tcp::2222-:2222,hostfwd=tcp::8080-:80" ./result/bin/run-nixos-vm
```

This last call is blocking, so I advice adding a `&` at the end of the command otherwise you will
need to run the rest of the commands in another terminal.

The nested command, the one in between the parenthesis `$(...)` is used to print the VM's public age key, whic.

With the VM started, make the secrets in `secrets.yaml` decryptable in the VM. This change will
appear in `git status` but you don't need to commit this.

```bash
SOPS_AGE_KEY_FILE=keys.txt \
  nix run --impure nixpkgs#sops -- --config sops.yaml -r -i \
  --add-age $(nix shell nixpkgs#ssh-to-age --command sh -c 'ssh-keyscan -p 2222 -t ed25519 -4 localhost 2>/dev/null | ssh-to-age') \
  secrets.yaml
```

If you forget this step, the deploy will seem to go fine but the secrets won't be populated and
Nextcloud will not start.

Make the ssh key private:

```bash
chmod 600 sshkey
```

This is only needed because git mangles with the permissions. You will not even see this change in
`git status`.

You can ssh into the VM with, but this is not required for the demo:

```bash
ssh -F ssh_config example
```

Finally, deploy with:

```bash
SSH_CONFIG_FILE=ssh_config nix run nixpkgs#colmena --impure -- apply
```

The deploy will take a few minutes the first time and subsequent deploys will take around 15
seconds.

## Access Nextcloud Through Your Browser {#access-nextcloud-through-your-browser}

Add the following entry to your `/etc/hosts` file:

```nix
networking.hosts = {
  "127.0.0.1" = [ "n.example.com" ];
};
```

Which produces:

```bash
$ cat /etc/hosts
127.0.0.1 n.example.com
```

Go to [http://n.example.com:8080](http://n.example.com:8080) and login with:

- username: `root`
- password: the value of the field `nextcloud.adminpass` in the `secrets.yaml` file which is `43bb4b8f82fc645ce3260b5db803c5a8`.

Nextcloud doesn't like being run without SSL protection, which this demo does not setup yet, so you
might see errors loading scripts.

## In More Details {#in-more-details}

### Files {#files}

- [`flake.nix`](./flake.nix): nix entry point, defines one target host for
  [colmena](https://colmena.cli.rs) to deploy to as well as the selfhostblock's config for
  setting up the Nextcloud service.
- [`configuration.nix`](./configuration.nix): defines all configuration required for colmena
  to deploy to the VM. The file has comments if you're interested.
- [`hardware-configuration.nix`](./hardware-configuration.nix): defines VM specific layout.
  This was generated with nixos-generate-config on the VM.
- Secrets related files:
  - [`keys.txt`](./keys.txt): your private key for sops-nix, allows you to edit the `secrets.yaml`
    file. This file should never be published but here I did it for convenience, to be able to
    deploy to the VM in less steps.
  - [`secrets.yaml`](./secrets.yaml): encrypted file containing required secrets for Nextcloud. This file can be publicly accessible.
  - [`sops.yaml`](./sops.yaml): describes how to create the `secrets.yaml` file. Can be publicly
    accessible.
- SSH related files:
  - [`sshkey(.pub)`](./sshkey): your private and public ssh keys. Again, the private key should usually not
    be published as it is here but this makes it possible to deploy to the VM in less steps.
  - [`ssh_config`](./ssh_config): the ssh config allowing you to ssh into the VM by just using the
    hostname `example`. Usually you would store this info in your `~/.ssh/config` file but it's
    provided here to avoid making you do that.

### Virtual Machine {#virtual-machine}

_More info about the VM._

We use `build-vm-with-bootloader` instead of just `build-vm` as that's the only way to deploy to the VM.

The VM's User and password are both `nixos`, as setup in the [`configuration.nix`](./configuration.nix) file under
`user.users.nixos.initialPassword`.

You can login with `ssh -F ssh_config example`. You just need to accept the fingerprint.

The VM's hard drive is a file name `nixos.qcow2` in this directory. It is created when you first create the VM and re-used since. You can just remove it when you're done.

That being said, the VM uses `tmpfs` to create the writable nix store so if you stumble in a disk
space issue, you must increase the
`virtualisation.vmVariantWithBootLoader.virtualisation.memorySize` setting.

### Secrets {#secrets}

_More info about the secrets._

The private key in the `keys.txt` file is created with:

```bash
$ nix shell nixpkgs#age --command age-keygen -o keys.txt
Public key: age1algdv9xwjre3tm7969eyremfw2ftx4h8qehmmjzksrv7f2qve9dqg8pug7
```

We use the printed public key in the `admin` field of the `sops.yaml` file.

The `secrets.yaml` file must follow the format:

```yaml
nextcloud:
    adminpass: 43bb4b8f82fc645ce3260b5db803c5a8
    onlyoffice:
        jwt_secret: XYZ...
```

To open the `secrets.yaml` file and optionnally edit it, run:

```bash
SOPS_AGE_KEY_FILE=keys.txt nix run --impure nixpkgs#sops -- \
  --config sops.yaml \
  secrets.yaml
```

You can generate random secrets with:

```bash
$ nix run nixpkgs#openssl -- rand -hex 64
```

If you choose a password too small, ldap could refuse to start.

#### Why do we need the VM's public key {#public-key-necessity}

The [`sops.yaml`](./sops.yaml) file describes what private keys can decrypt and encrypt the
[`secrets.yaml`](./secrets.yaml) file containing the application secrets. Usually, you will create and add
secrets to that file and when deploying, it will be decrypted and the secrets will be copied
in the `/run/secrets` folder on the VM. We thus need one private key for you to edit the
[`secrets.yaml`](./secrets.yaml) file and one in the VM for it to decrypt the secrets.

Your private key is already pre-generated in this repo, it's the [`sshkey`](./sshkey) file. But when
creating the VM in the step above, a new private key and its accompanying public key were
automatically generated under `/etc/ssh/ssh_host_ed25519_key` in the VM. We just need to get the
public key and add it to the `secrets.yaml` which we did in the Deploy section.

### SSH {#ssh}

The private and public ssh keys were created with:

```bash
ssh-keygen -t ed25519 -f sshkey
```

You don't need to copy over the ssh public key over to the VM as we set the `keyFiles` option which copies the public key when the VM gets created.
This allows us also to disable ssh password authentication.

For reference, if instead you didn't copy the key over on VM creating and enabled ssh
authentication, here is what you would need to do to copy over the key:

```bash
$ nix shell nixpkgs#openssh --command ssh-copy-id -i sshkey -F ssh_config example
```

### Deploy {#deploy}

If you get a NAR hash mismatch error like hereunder, you need to run `nix flake lock --update-input
selfhostblocks`.

```
error: NAR hash mismatch in input ...
```

### Update Demo {#update-demo}

If you update the Self Host Blocks configuration in `flake.nix` file, you can just re-deploy.

If you update the `configuration.nix` file, you will need to rebuild the VM from scratch.

If you update a module in the Self Host Blocks repository, you will need to update the lock file with:

```bash
nix flake lock --override-input selfhostblocks ../.. --update-input selfhostblocks
```